The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Three-dimensional porous graphene-based composite materials: electrochemical synthesis and application
Abstract
A general method for the fabrication of three-dimensional (3D) porous graphene-based composite materials is reported. This method involves two consecutive electrochemical steps. Firstly, 3D graphene (ERGO) porous material is prepared electrochemically by reducing a concentrated graphene oxide dispersion. Subsequently, the second component is electrochemically deposited onto this 3D ERGO matrix, yielding graphene-based 3D porous composite material. The prepared graphene-based composite materials have a conductive graphene network as the matrix, onto which the second component is homogeneously coated. Conducting polymers, noble metal nanoparticles and metal oxide were successfully incorporated into ERGO architectures, demonstrating the versatility of this method. Taking the ERGO–polyaniline composite as an example, the influence of deposition rate on the morphology of the composite was investigated. Finally, the application of the composite materials prepared with our method was discussed. The high surface area and low electrolyte transport resistance make these electrosynthesized composites suitable electrode materials for electrochemical devices. The ERGO–polyaniline composite electrode showed a high specific capacitance of 716 F g−1 at 0.47 A g−1, and this capacitance could be maintained at 502 F g−1 as the discharge current density was increased up to 4.2 A g−1.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Cited by
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
Tan, C., Cao, X., Wu, X.-J., He, Q., Yang, J., Zhang, X., Chen, J., Zhao, W., Han, S., Nam, G.-H., et al. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00558 · Cited by 5,100
Ultralight and Highly Compressible Graphene Aerogels
Hu, H., Zhao, Z., Wan, W., Gogotsi, Y., & Qiu, J. (2013) · Advanced Materials · doi:10.1002/adma.201204530 · Cited by 1,383
Three-dimensional graphene materials: preparation, structures and application in supercapacitors
Cao, X., Yin, Z., & Zhang, H. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00050a · Cited by 826
Porous Graphene Materials for Advanced Electrochemical Energy Storage and Conversion Devices
Han, S., Wu, D., Li, S., Zhang, F., & Feng, X. (2014) · Advanced Materials · doi:10.1002/adma.201303115 · Cited by 712
Zhang, F., Feng, Y., & Feng, W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100580 · Cited by 566
Metadata
- Authors
- Chen, K., Chen, L., Chen, Y., Bai, H., & Li, L.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 22
- Issue
- 39
- Pages
- 20968
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2091952707
- Cited by
- 240
- References
- 2
- FWCI
- 7.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.