The DOI matches its Crossref record.
Strongly adhesive and flexible transparent silver nanowire conductive films fabricated with a high-intensity pulsed light technique
Abstract
Large-scale silver nanowire (AgNW) mesh films have received increasing attention as new transparent conductive films used in various printed devices. However, there are two crucial issues in implementing AgNWs that need to be addressed: (1) strong adhesion between AgNW film and substrate and (2) high conductivity with short treatment time for low-cost printed technology. Here, a high-intensity pulsed light (HIPL) sintering technique, which provides extreme heating locally in the AgNW film and at the interface between the film and polymer substrate, sinters the AgNW film to produce high conductivity with strong adhesion on the substrate. Importantly, light intensity, exposure time, and AgNW amount can be adjusted simply to form films that meet specific device needs. A flexible AgNW film with sheet resistance of 19 Ω sq−1 and transmittance of 83% at 550 nm is obtained with only one-step on a polyethylene terephthalate substrate with a light intensity of 1.14 J cm−2 under an exposure time of only 50 μs. The film can endure multiple peeling tests, which will play an important role in printed electronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Metal Nanowire Networks: The Next Generation of Transparent Conductors
Ye, S., Rathmell, A. R., Chen, Z., Stewart, I. E., & Wiley, B. J. (2014) · Advanced Materials · doi:10.1002/adma.201402710 · Cited by 796
Huang, Q., & Zhu, Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800546 · Cited by 482
Harris, K. D., Elias, A. L., & Chung, H.-J. (2016) · Journal of Materials Science · doi:10.1007/s10853-015-9643-3 · Cited by 403
Azani, M., Hassanpour, A., & Torres, T. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002536 · Cited by 326
Facile synthesis of very-long silver nanowires for transparent electrodes
Jiu, J., Araki, T., Wang, J., Nogi, M., Sugahara, T., Nagao, S., Koga, H., Suganuma, K., Nakazawa, E., Hara, M., et al. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00502c · Cited by 294
Self-citation
Metadata
- Authors
- Jiu, J., Nogi, M., Sugahara, T., Tokuno, T., Araki, T., Komoda, N., Suganuma, K., Uchida, H., & Shinozaki, K.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 22
- Issue
- 44
- Pages
- 23561
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1994498665
- Cited by
- 220
- References
- 0
- FWCI
- 10.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Strongly adhesive and flexible transparent silver nanowire conductive films fabricated with a high-intensity pulsed light technique. https://app.cochat.ai/papers/10.1039/c2jm35545k
- The paper
- Jiu, J., Nogi, M., Sugahara, T., Tokuno, T., Araki, T., Komoda, N., Suganuma, K., Uchida, H., & Shinozaki, K. (2012). Strongly adhesive and flexible transparent silver nanowire conductive films fabricated with a high-intensity pulsed light technique. Journal of Materials Chemistry. https://doi.org/10.1039/c2jm35545k
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.