The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Epoxy resin nanosuspensions and reinforced nanocomposites from polyaniline stabilized multi-walled carbon nanotubes
Abstract
The high performance multi-walled carbon nanotubes (MWNTs) reinforced epoxy polymer nanocomposites (PNCs) have been synthesized at different MWNT loading levels. The surface functionalization of MWNTs with conductive PANI was achieved by using a facile surface initiated polymerization method with the aid of the oxidations of CNTs and subsequent anilines by hexavalent chromium (Cr(VI)) oxidant. The effects of MWNT loading, surface functionalization and temperature on the rheological behaviors of liquid epoxy resin nanosuspensions and on the physicochemical properties of cured solid PNCs were systematically investigated. The glass transition temperature (Tg) of the cured epoxy PNCs filled with functionalized MWNTs obtained from the dynamic mechanical analysis (DMA) test was increased about 6–25 °C than that of cured pure epoxy. The PNCs reinforced with functionalized MWNTs demonstrated an enhanced tensile strength than either cured pure epoxy or its PNCs filled with the as-received MWNTs. The electrical conductivity of cured epoxy PNCs with functionalized MWNTs was improved by 5.5 orders of magnitude compared with cured pure epoxy. Thermogravimetric analysis (TGA) revealed an enhanced thermo-stability in the cured epoxy PNCs filled with functionalized MWNTs than that of cured pure epoxy and its PNCs filled with the as-received MWNTs. The observed strong interfacial interaction between MWNTs and the epoxy resin matrix was responsible for the enhanced mechanical tensile strength. The nanocomposite formation mechanism is proposed based on the analysis from Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA), Raman and differential scanning calorimetry (DSC) tests.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Jung, Y. C., Kim, H. H., Kim, Y. A., Kim, J. H., Cho, J. W., Endo, M., & Dresselhaus, M. S. (2010) · Macromolecules · doi:10.1021/ma101039y · Cited by 83
Cited by
Mechanical properties of epoxy composites filled with silane-functionalized graphene oxide
Wan, Y.-J., Gong, L.-X., Tang, L.-C., Wu, L.-B., & Jiang, J.-X. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.04.023 · Cited by 635
Kumar, A., Sharma, K., & Dixit, A. R. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-04196-y · Cited by 338
Metadata
- Authors
- Gu, H., Tadakamalla, S., Zhang, X., Huang, Y., Jiang, Y., Colorado, H. A., Luo, Z., Wei, S., & Guo, Z.
- Venue
- J. Mater. Chem. C
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 4
- Pages
- 729-743
- ISSN
- 2050-7526 (ISSN-L)
- 2050-7534
- OpenAlex
- W2023848456
- Cited by
- 177
- References
- 1
- FWCI
- 8.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.