The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
In-depth safety-focused analysis of solvents used in electrolytes for large scale lithium ion batteries
Abstract
To better rule out the complex fire risk related to large format lithium ion cells, a detailed and systematic evaluation, both at component and cell levels, could be an invaluable milestone. Therefore, combustion analysis was conducted for major single organic solvents and their mixtures used in lithium ion battery technology, both in oxygen rich and lean environments using a Tewarson calorimeter. Well controlled test conditions have enabled the determination of key parameters governing the fire induced hazards such as flash point, ease of ignition, heat release rate, effective heat of combustion, specific mass loss rate, as well as the assessment of fire induced toxicity. Moreover, a rule of thumb for the screening of new solvents including the safety perspective such as the Boie correlation and N-factor were introduced for predicting the heat of combustion and combustion kinetics, respectively, prior to conducting any experimental work. Fire induced toxicity of single solvents and their mixtures was also briefly examined by performing toxic gas measurements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Smart, M. C., Ratnakumar, B. V., & Surampudi, S. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1453407 · Cited by 234
Cited by
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
A review of lithium ion battery failure mechanisms and fire prevention strategies
Wang, Q., Mao, B., Stoliarov, S. I., & Sun, J. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.03.002 · Cited by 1,755
Koerver, R., Aygün, I., Leichtweiß, T., Dietrich, C., Zhang, W., Binder, J. O., Hartmann, P., Zeier, W. G., & Janek, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00931 · Cited by 1,020
Safer Electrolytes for Lithium‐Ion Batteries: State of the Art and Perspectives
Kalhoff, J., Eshetu, G. G., Bresser, D., & Passerini, S. (2015) · ChemSusChem · doi:10.1002/cssc.201500284 · Cited by 877
Self-citationCurrent Li-Ion Battery Technologies in Electric Vehicles and Opportunities for Advancements
Miao, Y., Hynan, P., von Jouanne, A., & Yokochi, A. (2019) · Energies · doi:10.3390/en12061074 · Cited by 874
Metadata
- Authors
- Eshetu, G. G., Grugeon, S., Laruelle, S., Boyanov, S., Lecocq, A., Bertrand, J.-P., & Marlair, G.
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 15
- Issue
- 23
- Pages
- 9145
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W2083273611
- Cited by
- 249
- References
- 1
- FWCI
- 13.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.