The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Rapid synthesis of nitrogen-doped graphene for a lithium ion battery anode with excellent rate performance and super-long cyclic stability
Abstract
Chemical doping of nitrogen into graphene can significantly enhance the reversible capacity and cyclic stability of the graphene-based lithium ion battery (LIB) anodes, and first principles calculations based on density functional theory suggested that pyridinic-N shows stronger binding with Li with reduced energy barrier for Li diffusion and thus is more effective for Li storage than pyrrolic and graphitic-N. Here, we report a novel and rapid (~30 seconds) process to fabricate nitrogen-doped graphene (NGr) by simultaneous thermal reduction of graphene oxide with ammonium hydroxide. The porous NGr with dominant pyridinic N atoms displays greatly enhanced reversible capacities, rate performance and exceptional cyclic stability as compared with pristine graphene. The reversible discharge capacity of the NGr electrode cycled between 0.01-3 V can reach 453 mA h g(-1) after 550 cycles at a charge rate of 2 A g(-1) (~5.4 C), and 180 mA h g(-1) after 2000 cycles at a high charge rate of 10 A g(-1) (~27 C) without any capacity fading. When charged within 0.01-1.5 V, the NGr anode still exhibits high reversible capacities of 224 mA h g(-1) and 169 mA h g(-1) after 700 cycles and 800 cycles at a charge rate of 1 A g(-1) and 5 A g(-1), respectively. Ex situ X-ray photoelectron spectroscopy (XPS) analysis of the NGr electrode upon lithiation and delithiation indicated that the pyridinic-N dominates the capacity enhancement at 3 V, while the pyrrolic-N contributes primarily to Li ion storage below 1.5 V.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, H., Maiyalagan, T., & Wang, X. (2012) · ACS Catalysis · doi:10.1021/cs200652y · Cited by 3,618
Cited by
Xu, Y., Zhang, C., Zhou, M., Fu, Q., Zhao, C., Wu, M., & Lei, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-04190-z · Cited by 1,149
Fu, Y., Wei, Q., Zhang, G., Wang, X., Zhang, J., Hu, Y., Wang, D., Zuin, L., Zhou, T., Wu, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801445 · Cited by 598
Carbon materials for ion-intercalation involved rechargeable battery technologies
Wang, G., Yu, M., & Feng, X. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00187b · Cited by 536
Yao, F., Pham, D. T., & Lee, Y. H. (2015) · ChemSusChem · doi:10.1002/cssc.201403490 · Cited by 312
High Conductive Two-Dimensional Covalent Organic Framework for Lithium Storage with Large Capacity
Yang, H., Zhang, S., Han, L., Zhang, Z., Xue, Z., Gao, J., Li, Y., Huang, C., Yi, Y., Liu, H., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12370 · Cited by 308
Metadata
- Authors
- Hu, T., Sun, X., Sun, H., Xin, G., Shao, D., Liu, C., & Lian, J.
- Venue
- Phys. Chem. Chem. Phys.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 16
- Issue
- 3
- Pages
- 1060-1066
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W1971246309
- Cited by
- 159
- References
- 1
- FWCI
- 11.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Rapid synthesis of nitrogen-doped graphene for a lithium ion battery anode with excellent rate performance and super-long cyclic stability. https://app.cochat.ai/papers/10.1039/c3cp54494j
- The paper
- Hu, T., Sun, X., Sun, H., Xin, G., Shao, D., Liu, C., & Lian, J. (2014). Rapid synthesis of nitrogen-doped graphene for a lithium ion battery anode with excellent rate performance and super-long cyclic stability. Phys. Chem. Chem. Phys. https://doi.org/10.1039/c3cp54494j
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.