The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Visible-light-induced WO3/g-C3N4 composites with enhanced photocatalytic activity
Abstract
Novel WO3/g-C3N4 composite photocatalysts were prepared by a calcination process with different mass contents of WO3. The photocatalysts were characterized by thermogravimetric analysis (TG), powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS), high-resolution transmission electron microscopy (HRTEM), UV-vis diffuse reflection spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) and electrochemical impedance spectroscopy (EIS). The photocatalytic activity of the photocatalysts was evaluated by degradation of methylene blue (MB) dye and 4-chlorophenol (4-CP) under visible light. The results indicated that the WO3/g-C3N4 composite photocatalysts showed higher photocatalytic activity than both the pure WO3 and pure g-C3N4. The optimum photocatalytic activity of WO3/g-C3N4 at a WO3 mass content of 9.7% under visible light irradiation was up to 4.2 times and 2.9 times as high as that of the pure WO3 and pure g-C3N4, respectively. The remarkably increased performance of WO3/g-C3N4 was mainly attributed to the synergistic effect between the interface of WO3 and g-C3N4, including enhanced optical absorption in the visible region, enlarged specific surface areas and the suitable band positions of WO3/g-C3N4 composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A metal-free polymeric photocatalyst for hydrogen production from water under visible light
Wang, X., Maeda, K., Thomas, A., Takanabe, K., Xin, G., Carlsson, J. M., Domen, K., & Antonietti, M. (2009) · Nature Materials · doi:10.1038/nmat2317 · Cited by 12,532
Wang, Y., Wang, X., & Antonietti, M. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201101182 · Cited by 3,364
Photodegradation Performance of g-C3N4 Fabricated by Directly Heating Melamine
Yan, S. C., Li, Z. S., & Zou, Z. G. (2009) · Langmuir · doi:10.1021/la900923z · Cited by 2,777
Semiconductor-mediated photodegradation of pollutants under visible-light irradiation
Chen, C., Ma, W., & Zhao, J. (2010) · Chemical Society Reviews · doi:10.1039/b921692h · Cited by 2,214
Subramanian, V., Wolf, E. E., & Kamat, P. V. (2004) · Journal of the American Chemical Society · doi:10.1021/ja0315199 · Cited by 2,036
Wang, X., Maeda, K., Chen, X., Takanabe, K., Domen, K., Hou, Y., Fu, X., & Antonietti, M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809307s · Cited by 1,809
Yan, S. C., Li, Z. S., & Zou, Z. G. (2010) · Langmuir · doi:10.1021/la904023j · Cited by 1,670
Metal‐Containing Carbon Nitride Compounds: A New Functional Organic–Metal Hybrid Material
Wang, X., Chen, X., Thomas, A., Fu, X., & Antonietti, M. (2009) · Advanced Materials · doi:10.1002/adma.200802627 · Cited by 1,333
Enhanced Nitrogen Doping in TiO2 Nanoparticles
Burda, C., Lou, Y., Chen, X., Samia, A. C. S., Stout, J., & Gole, J. L. (2003) · Nano Letters · doi:10.1021/nl034332o · Cited by 1,215
Enhancement of photocurrent and photocatalytic activity of ZnO hybridized with graphite-like C3N4
Wang, Y., Shi, R., Lin, J., & Zhu, Y. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00825g · Cited by 1,101
Cited by
Ong, W.-J., Tan, L.-L., Ng, Y. H., Yong, S.-T., & Chai, S.-P. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00075 · Cited by 7,147
Low, J., Yu, J., Jaroniec, M., Wageh, S., & Al‐Ghamdi, A. A. (2017) · Advanced Materials · doi:10.1002/adma.201601694 · Cited by 5,031
Polymeric Photocatalysts Based on Graphitic Carbon Nitride
Cao, S., Low, J., Yu, J., & Jaroniec, M. (2015) · Advanced Materials · doi:10.1002/adma.201500033 · Cited by 3,674
A review on g-C 3 N 4 -based photocatalysts
Wen, J., Xie, J., Chen, X., & Li, X. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2016.07.030 · Cited by 2,989
g‐C3N4‐Based Heterostructured Photocatalysts
Fu, J., Yu, J., Jiang, C., & Cheng, B. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701503 · Cited by 2,565
Graphitic carbon nitride based nanocomposites: a review
Zhao, Z., Sun, Y., & Dong, F. (2015) · Nanoscale · doi:10.1039/c4nr03008g · Cited by 1,661
Dong, F., Zhao, Z., Xiong, T., Ni, Z., Zhang, W., Sun, Y., & Ho, W.-K. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am403653a · Cited by 1,363
Sulfur-doped g-C3N4 with enhanced photocatalytic CO2-reduction performance
Wang, K., Li, Q., Liu, B., Cheng, B., Ho, W., & Yu, J. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.03.045 · Cited by 1,354
Liao, G., Gong, Y., Zhang, L., Gao, H., Yang, G.-J., & Fang, B. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00717b · Cited by 1,075
Ismael, M. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.156446 · Cited by 703
Graphitic C3N4 based noble-metal-free photocatalyst systems: A review
Masih, D., Ma, Y., & Rohani, S. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.01.061 · Cited by 674
Hao, R., Wang, G., Tang, H., Sun, L., Xu, C., & Han, D. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.01.026 · Cited by 668
Tonda, S., Kumar, S., Kandula, S., & Shanker, V. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta15358d · Cited by 658
Jiang, L., Yuan, X., Zeng, G., Liang, J., Chen, X., Yu, H., Wang, H., Wu, Z., Zhang, J., & Xiong, T. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.01.042 · Cited by 635
Xu, M., Han, L., & Dong, S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4038307 · Cited by 594
Liu, L., Qi, Y., Lu, J., Lin, S., An, W., Liang, Y., & Cui, W. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.10.035 · Cited by 514
Samanta, S., Martha, S., & Parida, K. (2014) · ChemCatChem · doi:10.1002/cctc.201300949 · Cited by 485
Zhang, S., Gu, P., Ma, R., Luo, C., Wen, T., Zhao, G., Cheng, W., & Wang, X. (2019) · Catalysis Today · doi:10.1016/j.cattod.2018.09.013 · Cited by 469
Acharya, R., & Parida, K. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.103896 · Cited by 462
Tong, Z., Yang, D., Xiao, T., Tian, Y., & Jiang, Z. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.08.072 · Cited by 438
Kumar, S., T, S., Kumar, B., Baruah, A., & Shanker, V. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp409651g · Cited by 420
Sudhaik, A., Raizada, P., Shandilya, P., Jeong, D.-Y., Lim, J.-H., & Singh, P. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2018.07.007 · Cited by 408
Photocatalytic materials and technologies for air purification
Ren, H., Koshy, P., Chen, W.-F., Qi, S., & Sorrell, C. C. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.08.072 · Cited by 380
Wang, X.-J., Yang, W.-Y., Li, F.-T., Xue, Y.-B., Liu, R.-H., & Hao, Y.-J. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie402820v · Cited by 365
Wang, Z., Guan, W., Sun, Y., Dong, F., Zhou, Y., & Ho, W.-K. (2015) · Nanoscale · doi:10.1039/c4nr05732e · Cited by 361
Liu, X., Jin, A., Jia, Y., Xia, T., Deng, C., Zhu, M., Chen, C., & Chen, X. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.02.025 · Cited by 348
Hou, Y., Zuo, F., Dagg, A. P., Liu, J., & Feng, P. (2014) · Advanced Materials · doi:10.1002/adma.201401032 · Cited by 343
Dai, K., Lu, L., Liang, C., Liu, Q., & Zhu, G. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.03.039 · Cited by 338
Mao, Z., Chen, J., Yang, Y., Wang, D., Bie, L., & Fahlman, B. D. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00370 · Cited by 329
Hao, R., Wang, G., Jiang, C., Tang, H., & Xu, Q. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.03.197 · Cited by 319
Han, C., Wang, Y., Lei, Y., Wang, B., Wu, N., Shi, Q., & Li, Q. (2015) · Nano Research · doi:10.1007/s12274-014-0600-2 · Cited by 318
Teixeira, I. F., Barbosa, E. C. M., Tsang, S. C. E., & Camargo, P. H. C. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00479j · Cited by 316
Huang, S., Xu, Y., Xie, M., Xu, H., He, M., Xia, J., Huang, L., & Li, H. (2015) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2015.03.035 · Cited by 313
Self-citationShao, H., Zhao, X., Wang, Y., Mao, R., Wang, Y., Qiao, M., Zhao, S., & Zhu, Y. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.07.016 · Cited by 306
Powerful combination of 2D g-C3N4 and 2D nanomaterials for photocatalysis: Recent advances
Zhang, X., Yuan, X., Jiang, L., Zhang, J., Yu, H., Wang, H., & Zeng, G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124475 · Cited by 305
Zang, Y., Li, L., Li, X., Lin, R., & Li, G. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.02.068 · Cited by 289
Xu, L., Huang, W.-Q., Wang, L.-L., Tian, Z.-A., Hu, W., Ma, Y., Wang, X., Pan, A., & Huang, G.-F. (2015) · Chemistry of Materials · doi:10.1021/cm504265w · Cited by 275
Xue, W., Huang, D., Li, J., Zeng, G., Deng, R., Yang, Y., Chen, S., Li, Z., Gong, X., & Li, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.069 · Cited by 260
Jayaraman, T., Murthy, A. P., Elakkiya, V., Chandrasekaran, S., Nithyadharseni, P., Khan, Z., Senthil, R. A., Shanker, R., Raghavender, M., Kuppusami, P., et al. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2018.02.029 · Cited by 183
Metadata
- Authors
- Huang, L., Xu, H., Li, Y., Li, H., Cheng, X., Xia, J., Xu, Y., & Cai, G.
- Venue
- Dalton Transactions
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 42
- Issue
- 24
- Pages
- 8606
- ISSN
- 1477-9226 (ISSN-L)
- 1477-9234
- OpenAlex
- W1999695878
- Cited by
- 516
- References
- 45
- FWCI
- 16.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.