The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
All-scale hierarchical thermoelectrics: MgTe in PbTe facilitates valence band convergence and suppresses bipolar thermal transport for high performance
Abstract
We report a high ZT of ∼2.0 at 823 K for 2% Na-doped PbTe with 6% MgTe with excellent thermal stability. We attribute the high thermoelectric performance to a synergistic combination of enhanced power factor, reduction of the lattice thermal conductivity and simultaneous suppression of bipolar thermal conductivity. MgTe inclusion in PbTe owns triple functions: the Mg alloying within the solubility limit in PbTe modifies the valence band structure by pushing the two valence bands (L and Σ bands) closer in energy, thereby facilitating charge carrier injection. When the solubility limit of Mg is exceeded, ubiquitous endotaxial nanostructures form, which when coupled with mesoscale microstructuring results in a very low (lattice) thermal conductivity through all-scaled length phonon scattering. Meanwhile, most significantly, the Mg alloying enlarges the energy gap of conduction band (C band) and light valence band (L band), thereby suppresses the bipolar thermal conductivity through an increase in band gap.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys
Poudel, B., Hao, Q., Ma, Y., Lan, Y., Minnich, A., Yu, B., Yan, X., Wang, D., Muto, A., Vashaee, D., et al. (2008) · Science · doi:10.1126/science.1156446 · Cited by 5,606
High-performance bulk thermoelectrics with all-scale hierarchical architectures
Biswas, K., He, J., Blum, I. D., Wu, C.-I., Hogan, T. P., Seidman, D. N., Dravid, V. P., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11439 · Cited by 4,740
Self-citationConvergence of electronic bands for high performance bulk thermoelectrics
Pei, Y., Shi, X., LaLonde, A., Wang, H., Chen, L., & Snyder, G. J. (2011) · Nature · doi:10.1038/nature09996 · Cited by 4,263
Enhancement of Thermoelectric Efficiency in PbTe by Distortion of the Electronic Density of States
Heremans, J. P., Jovovic, V., Toberer, E. S., Saramat, A., Kurosaki, K., Charoenphakdee, A., Yamanaka, S., & Snyder, G. J. (2008) · Science · doi:10.1126/science.1159725 · Cited by 4,161
Cubic AgPb m SbTe 2+ m : Bulk Thermoelectric Materials with High Figure of Merit
Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., & Kanatzidis, M. G. (2004) · Science · doi:10.1126/science.1092963 · Cited by 2,927
Self-citationQuantitative measurement of displacement and strain fields from HREM micrographs
Hÿtch, M. J., Snoeck, E., & Kilaas, R. (1998) · Ultramicroscopy · doi:10.1016/s0304-3991(98)00035-7 · Cited by 2,752
Quantum Dot Superlattice Thermoelectric Materials and Devices
Harman, T. C., Taylor, P. J., Walsh, M. P., & LaForge, B. E. (2002) · Science · doi:10.1126/science.1072886 · Cited by 2,495
Bulk nanostructured thermoelectric materials: current research and future prospects
Minnich, A. J., Dresselhaus, M. S., Ren, Z. F., & Chen, G. (2009) · Energy & Environmental Science · doi:10.1039/b822664b · Cited by 2,005
Nanostructured Thermoelectrics: The New Paradigm?
Kanatzidis, M. G. (2010) · Chemistry of Materials · doi:10.1021/cm902195j · Cited by 1,153
Self-citationStrained endotaxial nanostructures with high thermoelectric figure of merit
Biswas, K., He, J., Zhang, Q., Wang, G., Uher, C., Dravid, V. P., & Kanatzidis, M. G. (2011) · Nature Chemistry · doi:10.1038/nchem.955 · Cited by 1,034
Self-citationResonant levels in bulk thermoelectric semiconductors
Heremans, J. P., Wiendlocha, B., & Chamoire, A. M. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02612g · Cited by 965
High-performance nanostructured thermoelectric materials
Li, J.-F., Liu, W.-S., Zhao, L.-D., & Zhou, M. (2010) · NPG Asia Materials · doi:10.1038/asiamat.2010.138 · Cited by 963
Self-citationSemiconducting Lead Chalcogenides
Ravich, Y. I., Efimova, B. A., & Smirnov, I. A. (1970) · Springer eBooks · doi:10.1007/978-1-4684-8607-0 · Cited by 904
High thermoelectric figure of merit in heavy hole dominated PbTe
Pei, Y., LaLonde, A., Iwanaga, S., & Snyder, G. J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00456a · Cited by 784
Zhao, X. B., Ji, X. H., Zhang, Y. H., Zhu, T. J., Tu, J. P., & Zhang, X. B. (2005) · Applied Physics Letters · doi:10.1063/1.1863440 · Cited by 515
High performance bulk thermoelectrics via a panoscopic approach
He, J., Kanatzidis, M. G., & Dravid, V. P. (2013) · Materials Today · doi:10.1016/j.mattod.2013.05.004 · Cited by 487
Self-citationNanoscale design to enable the revolution in renewable energy
Baxter, J., Bian, Z., Chen, G., Danielson, D., Dresselhaus, M. S., Fedorov, A. G., Fisher, T. S., Jones, C. W., Maginn, E., Kortshagen, U., et al. (2009) · Energy & Environmental Science · doi:10.1039/b821698c · Cited by 431
Reevaluation of PbTe1−xIx as high performance n-type thermoelectric material
LaLonde, A. D., Pei, Y., & Snyder, G. J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01314a · Cited by 416
Girard, S. N., He, J., Zhou, X., Shoemaker, D., Jaworski, C. M., Uher, C., Dravid, V. P., Heremans, J. P., & Kanatzidis, M. G. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206380h · Cited by 349
Self-citationHe, J., Girard, S. N., Kanatzidis, M. G., & Dravid, V. P. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901905 · Cited by 333
Self-citationDirect observation of a fully strained dead layer at Ba0.7Sr0.3TiO3∕SrRuO3 interface
He, J., Vasco, E., Jia, C., & Wang, R. H. (2005) · Applied Physics Letters · doi:10.1063/1.2008372 · Cited by 306
Self-citationZhao, L.-D., He, J., Wu, C.-I., Hogan, T. P., Zhou, X., Uher, C., Dravid, V. P., & Kanatzidis, M. G. (2012) · Journal of the American Chemical Society · doi:10.1021/ja301772w · Cited by 266
Self-citationThe Electrical Conductivity and Thermoelectric Power of Bismuth Telluride
Goldsmid, H. J. (1958) · Proceedings of the Physical Society · doi:10.1088/0370-1328/71/4/312 · Cited by 190
Coherent and incoherent phase stabilities of thermoelectric rocksalt IV-VI semiconductor alloys
Doak, J. W., & Wolverton, C. M. (2012) · Physical Review B · doi:10.1103/physrevb.86.144202 · Cited by 46
Self-citation
Cited by
Rationally Designing High-Performance Bulk Thermoelectric Materials
Tan, G., Zhao, L.-D., & Kanatzidis, M. G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00255 · Cited by 2,355
Self-citationCompromise and Synergy in High‐Efficiency Thermoelectric Materials
Zhu, T., Liu, Y., Fu, C., Heremans, J. P., Snyder, J. G., & Zhao, X. (2017) · Advanced Materials · doi:10.1002/adma.201605884 · Cited by 1,616
High Performance Thermoelectric Materials: Progress and Their Applications
Yang, L., Chen, Z., Dargusch, M. S., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701797 · Cited by 958
Thinking Like a Chemist: Intuition in Thermoelectric Materials
Zeier, W. G., Zevalkink, A., Gibbs, Z. M., Hautier, G., Kanatzidis, M. G., & Snyder, G. J. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201508381 · Cited by 882
Self-citationTang, Y., Gibbs, Z. M., Agapito, L. A., Li, G., Kim, H.-S., Nardelli, M. B., Curtarolo, S., & Snyder, G. J. (2015) · Nature Materials · doi:10.1038/nmat4430 · Cited by 772
Metadata
- Authors
- Zhao, L. D., Wu, H. J., Hao, S. Q., Wu, C. I., Zhou, X. Y., Biswas, K., He, J. Q., Hogan, T. P., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 6
- Issue
- 11
- Pages
- 3346
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2071509666
- Cited by
- 767
- References
- 27
- FWCI
- 19.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.