Efficient microalgae harvesting by organo-building blocks of nanoclays
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The synthesis of aminoclays with Mg2+ or Fe3+, placed in metal centers by sol–gel reaction with 3-aminopropyltriethoxysilane (APTES) as a precursor, is demonstrated, producing –(CH2)3NH2 organo-functional pendants which are covalent-bonding onto cationic metals. The protonated amine groups in aqueous solution lead the efficient sedimentation (harvesting) of microalgae biomass within approximately 5 min and 120 min for fresh and marine species, respectively. To our surprise, the aminoclays did not depend on microalgae species or media for microalgae harvesting. In particular, the harvesting efficiency (%) of microalgae was not decreased in a wide pH region. The harvesting mechanism can be explained by the sweep flocculation of microalgae, which is confirmed by measurement of zeta potential of aminoclay in aqueous solution where aminoclay shows a positively charged surface in a wide pH region. In order to reduce the cost of aminoclays and to make the harvesting procedures simple, the membrane process using aminoclay-coated cotton filter is introduced for the treatment of 1 L-scale microalgae stocks. It is successfully performed with three recycles using the same aminoclay-coated cotton filter after removing the harvested microalgae biomass. Conclusively, the aminoclay-based microalgae harvesting systems are a promising means of reducing the cost of downstream processes in microalgae-based biorefinery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chen, C.-Y., Yeh, K.-L., Aisyah, R., Lee, D.-J., & Chang, J.-S. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.159 · Cited by 1,860
Microalgal production — A close look at the economics
Norsker, N.-H., Barbosa, M. J., Vermuë, M. H., & Wijffels, R. H. (2011) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.08.005 · Cited by 819
Microalgae for the production of bulk chemicals and biofuels
Wijffels, R. H., Barbosa, M. J., & Eppink, M. H. M. (2010) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.215 · Cited by 522
Algae as a source of renewable chemicals: opportunities and challenges
Foley, P. M., Beach, E. S., & Zimmerman, J. B. (2011) · Green Chemistry · doi:10.1039/c1gc00015b · Cited by 219
Cited by
Harvesting techniques applied to microalgae: A review
Barros, A. I., Gonçalves, A. L., Simões, M., & Pires, J. C. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.09.037 · Cited by 1,015
Methods of downstream processing for the production of biodiesel from microalgae
Kim, J., Yoo, G., Lee, H., Lim, J., Kim, K., Kim, C. W., Park, M. S., & Yang, J.-W. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2013.04.006 · Cited by 519
Self-citationMathimani, T., & Mallick, N. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.083 · Cited by 323
Harvesting of Microalgae by Flocculation
Branyikova, I., Prochazkova, G., Potocar, T., Jezkova, Z., & Branyik, T. (2018) · Fermentation · doi:10.3390/fermentation4040093 · Cited by 195
Nanoparticle applications in Algal-biorefinery for biofuel production
Ali, H. E. A., El-fayoumy, E. A., Soliman, R. M., Elkhatat, A., Al-Meer, S., Elsaid, K., Hussein, H. A., Zul Helmi Rozaini, M., & Azmuddin Abdullah, M. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.114267 · Cited by 46
Kim, D.-H., Yun, H.-S., Kim, Y.-S., & Kim, J.-G. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.588210 · Cited by 28
Metadata
- Authors
- Farooq, W., Lee, Y.-C., Han, J.-I., Darpito, C. H., Choi, M., & Yang, J.-W.
- Venue
- Green Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 15
- Issue
- 3
- Pages
- 749
- ISSN
- 1463-9262 (ISSN-L)
- 1463-9270
- OpenAlex
- W2056618864
- Cited by
- 83
- References
- 4
- FWCI
- 11.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.