The DOI matches its Crossref record.
Visible-light photocatalytic degradation performances and thermal stability due to the synergetic effect of TiO2 with conductive copolymers of polyaniline and polypyrrole
Abstract
Conductive polypyrrole-polyaniline/TiO2 nanocomposites (PPy-PANI/TiO2) were prepared by in situ oxidative copolymerization of pyrrole and aniline monomers in the presence of TiO2. For comparison studies, polypyrrole/TiO2 (PPy/TiO2) and polyaniline/TiO2 (PANI/TiO2) were also prepared. The samples were characterized by X-ray diffraction, transmission electron microscopy, UV-vis diffuse reflectance spectroscopy, zeta potential analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis and photocurrent tests. In contrast to PPy/TiO2 and PANI/TiO2, PPy-PANI/TiO2 exhibits obvious absorption in the visible-light range, and is much superior to PPy/TiO2 and PANI/TiO2 in thermal stability. It is found that PPy-PANI/TiO2 performs well in the visible-light photocatalytic degradation of 4-nitrophenol. The optimized pyrrole : aniline : TiO2 molar ratio for best performance is 0.75 : 0.25 : 100. The efficacy of PPy-PANI/TiO2 is attributed to its conductivity, conjugated structure, as well as to the synergy amidst polypyrrole, polyaniline and TiO2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Rafiq, A., Ikram, M., Ali, S., Niaz, F., Khan, M., Khan, Q., & Maqbool, M. (2021) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2021.02.017 · Cited by 1,172
Dong, S., Feng, J., Fan, M., Pi, Y., Hu, L., Han, X., Liu, M., Sun, J., & Sun, J. (2015) · RSC Advances · doi:10.1039/c4ra13734e · Cited by 1,002
Hybrid nanostructures based on titanium dioxide for enhanced photocatalysis
Reddy, K. R., Hassan, M., & Gomes, V. G. (2015) · Applied Catalysis A: General · doi:10.1016/j.apcata.2014.10.001 · Cited by 696
A Review on the Factors Affecting the Photocatalytic Degradation of Hazardous Materials
Kumar, A. (2017) · Material Science & Engineering International Journal · doi:10.15406/mseij.2017.01.00018 · Cited by 493
Hu, P., Han, L., & Dong, S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am404539j · Cited by 57
Metadata
- Authors
- Deng, F., Min, L., Luo, X., Wu, S., & Luo, S.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 5
- Issue
- 18
- Pages
- 8703
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W2111163917
- Cited by
- 163
- References
- 0
- FWCI
- 3.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.