The DOI matches its Crossref record; 248 of the 248 references it cites were found in a registry or an index.
Highly reactive {001} facets of TiO2-based composites: synthesis, formation mechanism and characterization
Abstract
Titanium dioxide (TiO2) is one of the most widely investigated metal oxides due to its extraordinary surface, electronic and catalytic properties. However, the large band gap of TiO2 and massive recombination of photogenerated electron-hole pairs limit its photocatalytic and photovoltaic efficiency. Therefore, increasing research attention is now being directed towards engineering the surface structure of TiO2 at the most fundamental and atomic level namely morphological control of {001} facets in the range of microscale and nanoscale to fine-tune its physicochemical properties, which could ultimately lead to the optimization of its selectivity and reactivity. The synthesis of {001}-faceted TiO2 is currently one of the most active interdisciplinary research areas and demonstrations of catalytic enhancement are abundant. Modifications such as metal and non-metal doping have also been extensively studied to extend its band gap to the visible light region. This steady progress has demonstrated that TiO2-based composites with {001} facets are playing and will continue to play an indispensable role in the environmental remediation and in the search for clean and renewable energy technologies. This review encompasses the state-of-the-art research activities and latest advancements in the design of highly reactive {001} facet-dominated TiO2via various strategies, including hydrothermal/solvothermal, high temperature gas phase reactions and non-hydrolytic alcoholysis methods. The stabilization of {001} facets using fluorine-containing species and fluorine-free capping agents is also critically discussed in this review. To overcome the large band gap of TiO2 and rapid recombination of photogenerated charge carriers, modifications are carried out to manipulate its electronic band structure, including transition metal doping, noble metal doping, non-metal doping and incorporating graphene as a two-dimensional (2D) catalyst support. The advancements made in these aspects are thoroughly examined, with additional insights related to the charge transfer events for each strategy of the modified-TiO2 composites. Finally, we offer a summary and some invigorating perspectives on the major challenges and new research directions for future exploitation in this emerging frontier, which we hope will advance us to rationally harness the outstanding structural and electronic properties of {001} facets for various environmental and energy-related applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–248 of 248
Biocompatible Anatase Single-Crystal Photocatalysts with Tunable Percentage of Reactive Facets
Zhang, D., Li, G., Wang, H., Chan, K. M., & Yu, J. C. (2010) · Crystal Growth & Design · doi:10.1021/cg900961k · Cited by 124
Li, J., Yu, Y., Chen, Q., Li, J., & Xu, D. (2010) · Crystal Growth & Design · doi:10.1021/cg9012087 · Cited by 123
Zhang, H., Wang, Y., Liu, P., Han, Y., Yao, X., Zou, J., Cheng, H., & Zhao, H. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200363p · Cited by 120
Fan, J., Cai, W., & Yu, J. (2011) · Chemistry - An Asian Journal · doi:10.1002/asia.201100188 · Cited by 119
Highly Thermal Stable and Highly Crystalline Anatase TiO2 for Photocatalysis
Li, W., Bai, Y., Liu, C., Yang, Z., Feng, X. F., Lü, X., van der Laak, N. K., & Chan, K. (2009) · Environmental Science & Technology · doi:10.1021/es8037005 · Cited by 118
Sensitization of photocatalytic activity of S- or N-doped TiO2 particles by adsorbing Fe3+ cations
Ohno, T., Miyamoto, Z., Nishijima, K., Kanemitsu, H., & Xueyuan, F. (2006) · Applied Catalysis A General · doi:10.1016/j.apcata.2005.12.010 · Cited by 116
Liu, L., Gu, X., Sun, C., Li, H., Deng, Y., Gao, F., & Dong, L. (2012) · Nanoscale · doi:10.1039/c2nr31859h · Cited by 116
Schulte, K. L., DeSario, P. A., & Gray, K. A. (2010) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2010.04.017 · Cited by 115
Morphology Evolution of TiO2 Facets and Vital Influences on Photocatalytic Activity
Pan, L., Zou, J., Wang, S., Liu, X., Zhang, X., & Wang, L. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201800j · Cited by 113
Manzoli, M., Chiorino, A., & Boccuzzi, F. (2004) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.11.002 · Cited by 108
Lai, Z., Peng, F., Wang, Y., Wang, H., Yu, H., Liu, P., & Zhao, H. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34880b · Cited by 105
Wang, X., Liu, G., Wang, L., Pan, J., Lu, G. Q., & Cheng, H. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm02694h · Cited by 102
Photocatalytic conversion of CO2 and H2O to fuels by nanostructured Ce–TiO2/SBA-15 composites
Zhao, C., Liu, L., Zhang, Q., Wang, J., & Li, Y. (2012) · Catalysis Science & Technology · doi:10.1039/c2cy20346d · Cited by 102
Xie, S., Han, X., Kuang, Q., Fu, J., Zhang, L., Xie, Z., & Zheng, L. (2011) · Chemical Communications · doi:10.1039/c1cc11542a · Cited by 97
Liu, B., Nakata, K., Sakai, M., Saito, H., Ochiai, T., Murakami, T., Takagi, K., & Fujishima, A. (2011) · Langmuir · doi:10.1021/la201547g · Cited by 97
Han, X., Wang, X., Xie, S., Kuang, Q., Ouyang, J., Xie, Z., & Zheng, L. (2012) · RSC Advances · doi:10.1039/c2ra00834c · Cited by 96
Surface Structure and Reactivity of Anatase TiO2 Crystals with Dominant {001} Facets
Selçuk, S., & Selloni, A. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp402100v · Cited by 95
Photocatalytic Activity of Hierarchical Flower-Like TiO2 Superstructures with Dominant {001} Facets
Xiang, Q., & Yu, J. (2011) · CHINESE JOURNAL OF CATALYSIS (CHINESE VERSION) · doi:10.1016/s1872-2067(10)60186-6 · Cited by 86
Cui, B., Peng, H., Xia, H., et al. (2012) · Separation and Purification Technology · doi:10.1016/j.seppur.2012.10.008 · Cited by 85
Xing, M., Qi, D., Zhang, J., & Chen, F. (2011) · Chemistry - A European Journal · doi:10.1002/chem.201101654 · Cited by 81
Lee, D.-S., Chen, H.-J., & Chen, Y. (2012) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2012.01.005 · Cited by 79
Wu, Q., Liu, M., Wu, Z.-J., Li, Y., & Piao, L.-Y. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp3087495 · Cited by 79
Enhanced photocatalytic activity of hybrid Fe2O3–Pd nanoparticulate catalysts
Wei, Y., Han, S., Walker, D., Warren, S. C., & Grzybowski, B. A. (2011) · Chemical Science · doi:10.1039/c2sc00673a · Cited by 76
Jung, M., Chu, M., & Kang, M. G. (2012) · Chemical Communications · doi:10.1039/c2cc31047c · Cited by 74
Li, L., Rohrer, G. S., & Salvador, P. A. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2012.05076.x · Cited by 74
Zhao, Z., Sun, Z., Zhao, H., et al. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm35045a · Cited by 73
Zong, X., Xing, Z., Yu, H., Chen, Z., Tang, F., Zou, J., Lu, G. Q., & Wang, L. (2011) · Chemical Communications · doi:10.1039/c1cc14453g · Cited by 73
The effect of platinum and silver deposits in the photocatalytic oxidation of resorcinol
Lam, S. W., Chiang, K., Lim, T. M., Amal, R., & Low, G. K.-C. (2006) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2006.11.019 · Cited by 70
Suzuki, T. M., Nakamura, T., Saeki, S., et al. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33980c · Cited by 68
Anatase TiO2 films with reactive {001} facets on transparent conductive substrate
Liu, B., & Aydil, E. S. (2011) · Chemical Communications · doi:10.1039/c1cc12365c · Cited by 66
Wu, W. H., Liao, L., Zhang, S., Zhou, J., Xiao, X., Ren, F., Sun, L., Dai, Z., & Jiang, C. (2013) · Nanoscale · doi:10.1039/c3nr00985h · Cited by 60
Dai, G., Liu, S., Liang, Y., Liu, H., & Zhong, Z. (2012) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2012.11.014 · Cited by 56
Li, L., Liu, X., Zhang, Y., Nuhfer, N. T., Barmak, K., Salvador, P. A., & Rohrer, G. S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4008837 · Cited by 56
Addamo, M., Bellardita, M., Carriazo, D., Paola, A. D., Milioto, S., Palmisano, L., & Rives, V. (2008) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2008.06.007 · Cited by 51
Yu, H., Tian, B., & Zhang, J. (2011) · Chemistry - A European Journal · doi:10.1002/chem.201003437 · Cited by 51
Wang, W., Lu, C., Ni, Y., et al. (2012) · CrystEngComm · doi:10.1039/c2ce26702k · Cited by 49
Oros-Ruíz, S., Pedraza-Avella, J. A., González, C. A. G., Quintana, M., Moctezuma, E., Ángel, G. D., Gómez, R., & Pérez, E. (2011) · Topics in Catalysis · doi:10.1007/s11244-011-9616-y · Cited by 49
Shen, J., Zhu, Y., Yang, X., & Li, C. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm31998e · Cited by 48
Zhou, X., Peng, F., Wang, H., Yu, H., & Fang, Y. (2011) · Chemical Communications · doi:10.1039/c1cc15751e · Cited by 48
Wu, L. B., Yang, B. X., Yang, H. G., Chen, Z., Li, Z., Zhao, H., Gong, X., & Yang, H. G. (2012) · CrystEngComm · doi:10.1039/c2ce26744f · Cited by 47
Zhang, J., Wang, J., Zhao, Z., Yu, T., Feng, J., Yuan, Y., Tang, Z., Liu, Y., Li, Z., & Zou, Z. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp24039d · Cited by 43
Li, T., Tian, B., Zhang, J., Dong, R., Wang, T., & Yang, F. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3030714 · Cited by 42
Rahal, R., Wankhade, A. V., Cha, D., Fihri, A., Ould‐Chikh, S., Patil, U., & Polshettiwar, V. (2012) · RSC Advances · doi:10.1039/c2ra21104a · Cited by 41
Shi, W., Yang, W., Li, Q., Gao, S., Shang, P., & Shang, J. K. (2012) · Nanoscale Research Letters · doi:10.1186/1556-276x-7-590 · Cited by 41
Wu, D., Gao, Z., Xu, F., Chang, J., Gao, S., & Jiang, K. Y. (2012) · CrystEngComm · doi:10.1039/c2ce26454d · Cited by 37
Wang, B., Guo, L., He, M., & He, T. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp50862e · Cited by 28
A solvothermal single‐step route towards shape‐controlled titanium dioxide nanocrystals
Dinh, C., Nguyen, T., Kleitz, F., & Do, T. (2011) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.20574 · Cited by 27
Zhang, D., Yang, X., Zhu, J., Zhang, Y., Zhang, P., & Li, G. (2011) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-011-2433-8 · Cited by 23
Cited by
Ong, W.-J., Tan, L.-L., Ng, Y. H., Yong, S.-T., & Chai, S.-P. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00075 · Cited by 7,147
Self-citationRecent Progress in Energy‐Driven Water Splitting
Tee, S. Y., Win, K. Y., Teo, W. S., Koh, L., Liu, S., Teng, C. P., & Han, M. (2017) · Advanced Science · doi:10.1002/advs.201600337 · Cited by 962
Photocatalytic fixation of nitrogen to ammonia: state-of-the-art advancements and future prospects
Chen, X., Li, N., Kong, Z., Ong, W.-J., & Zhao, X. (2018) · Materials Horizons · doi:10.1039/c7mh00557a · Cited by 771
Self-citationZ‐Scheme Photocatalytic Systems for Carbon Dioxide Reduction: Where Are We Now?
Zhang, W., Mohamed, A. R., & Ong, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201914925 · Cited by 667
Self-citationRen, Y., Zeng, D., & Ong, W.-J. (2019) · Chinese Journal of Catalysis · doi:10.1016/s1872-2067(19)63293-6 · Cited by 528
Self-citation
Metadata
- Authors
- Ong, W.-J., Tan, L.-L., Chai, S.-P., Yong, S.-T., & Mohamed, A. R.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 6
- Issue
- 4
- Pages
- 1946
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W2061588150
- Cited by
- 469
- References
- 248
- FWCI
- 17.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.