The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
One-step synthesis of graphene nanoribbon–MnO2 hybrids and their all-solid-state asymmetric supercapacitors
Abstract
Three-dimensional (3D) hierarchical hybrid nanomaterials (GNR-MnO₂) of graphene nanoribbons (GNR) and MnO₂ nanoparticles have been prepared via a one-step method. GNR, with unique features such as high aspect ratio and plane integrity, has been obtained by longitudinal unzipping of multi-walled carbon nanotubes (CNTs). By tuning the amount of oxidant used, different mass loadings of MnO₂ nanoparticles have been uniformly deposited on the surface of GNRs. Asymmetric supercapacitors have been fabricated with the GNR-MnO₂ hybrid as the positive electrode and GNR sheets as the negative electrode. Due to the desirable porous structure, excellent electrical conductivity, as well as high rate capability and specific capacitances of both the GNR and GNR-MnO₂ hybrid, the optimized GNR//GNR-MnO₂ asymmetric supercapacitor can be cycled reversibly in an enlarged potential window of 0-2.0 V. In addition, the fabricated GNR//GNR-MnO₂ asymmetric supercapacitor exhibits a significantly enhanced maximum energy density of 29.4 W h kg(-1) (at a power density of 12.1 kW kg(-1)), compared with that of the symmetric cells based on GNR-MnO₂ hybrids or GNR sheets. This greatly enhanced energy storage ability and high rate capability can be attributed to the homogeneous dispersion and excellent pseudocapacitive performance of MnO₂ nanoparticles and the high electrical conductivity of the GNRs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lower-Defect Graphene Oxide Nanoribbons from Multiwalled Carbon Nanotubes
Higginbotham, A. L., Kosynkin, D. V., Sinitskii, A., Sun, Z., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn100118m · Cited by 585
Cited by
Design and Mechanisms of Asymmetric Supercapacitors
Shao, Y., El-Kady, M. F., Sun, J., Li, Y., Zhang, Q., Zhu, M., Wang, H., Dunn, B., & Kaner, R. B. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00252 · Cited by 3,637
MnO2-based nanostructures for high-performance supercapacitors
Huang, M., Li, F., Dong, F., Zhang, Y. X., & Zhang, L. L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05523g · Cited by 929
Engineering of MnO2-based nanocomposites for high-performance supercapacitors
Wang, J.-G., Kang, F., & Wei, B. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.04.003 · Cited by 568
An Aqueous Rechargeable Zn//Co3O4 Battery with High Energy Density and Good Cycling Behavior
Wang, X., Wang, F., Wang, L., Li, M., Wang, Y., Chen, B., Zhu, Y., Fu, L., Zha, L., Zhang, L., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505370 · Cited by 493
NiCo2O4-based materials for electrochemical supercapacitors
Wu, Z., Zhu, Y., & Ji, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02390k · Cited by 491
Metadata
- Authors
- Liu, M., Tjiu, W. W., Pan, J., Zhang, C., Gao, W., & Liu, T.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 6
- Issue
- 8
- Pages
- 4233
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W2014677591
- Cited by
- 196
- References
- 1
- FWCI
- 12.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.