Degradation of aniline with zero-valent iron as an activator of persulfate in aqueous solution
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Zero valent iron (ZVI) can activate persulfate to generate sulfate free radicals which are a strong oxidant to degrade organic pollutants. The oxidative degradation of aniline in aqueous solution by persulfate activated with zero valent iron was studied under laboratory conditions. Batch experiments were conducted to investigate the effects of different parameters such as pH, ZVI concentration, aniline concentration, persulfate concentration and reaction temperature on aniline degradation. The results showed that aniline degradation increased with increasing temperature. The optimum dosage of ZVI was 0.4 g L−1 and 85% aniline degradation was observed. Maximum aniline degradation was observed at pH 4.0, whereas at pH above or below 4.0, aniline degradation efficiency was decreased. In the persulfate-ZVI system, the apparent energy of activation for aniline degradation was 14.85 kJ mol−1. The existence of persulfate radicals and hydroxyl radicals produced during the degradation of aniline were identified with scavenger ethanol and tert-butyl alcohol. The reaction intermediates nitrobenzene, nitroso-benzene and p-benzoquinone were detected by gas chromatography-mass spectrometry and based on these intermediates obtained a probable pathway for aniline degradation has been proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kolthoff, I. M., & Miller, I. K. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01151a024 · Cited by 1,115
Cited by
Activated persulfate for organic chemical degradation: A review
Matzek, L. W., & Carter, K. E. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.02.055 · Cited by 1,493
Luo, S., Wei, Z., Dionysiou, D. D., Spinney, R., Hu, W.-P., Chai, L., Yang, Z., Ye, T., & Xiao, R. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.06.179 · Cited by 418
Kim, C., Ahn, J.-Y., Kim, T. Y., Shin, W. S., & Hwang, I. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b05847 · Cited by 415
Hussain, I., Li, M., Zhang, Y., Li, Y., Huang, S., Du, X., Liu, G., Hayat, W., & Anwar, N. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.11.085 · Cited by 382
Self-citationOh, W.-D., & Lim, T.-T. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.203 · Cited by 334
Metadata
- Authors
- Hussain, I., Zhang, Y., & Huang, S.
- Venue
- RSC Adv.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 4
- Issue
- 7
- Pages
- 3502-3511
- ISSN
- 2046-2069 (ISSN-L)
- OpenAlex
- W2146792415
- Cited by
- 150
- References
- 1
- FWCI
- 5.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.