The DOI matches its Crossref record.
Covalently bonded interfaces for polymer/graphene composites
Abstract
The interface is well known for taking a critical role in the determination of the functional and mechanical properties of polymer composites. Previous interface research has focused on utilising reduced graphene oxide that is limited by a low structural integrity, which means a high fraction is needed to produce electrically conductive composites. By using 4,4′-diaminophenylsulfone, we in this study chemically modified high-structural integrity graphene platelets (GnPs) of 2–4 nm in thickness, covalently bonded GnPs with an epoxy matrix, and investigated the morphology and functional and mechanical performance of these composites. This covalently bonded interface prevented GnPs stacking in the matrix. In comparison with unmodified composites showing no reduction in electrical volume resistivity, the interface-modified composite at 0.489 vol% GnPs demonstrates an eight-order reduction in the resistivity, a 47.7% further improvement in modulus and 84.6% in fracture energy release rate. Comparison of GnPs with clay and multi-walled carbon nanotubes shows that our GnPs are more advantageous in terms of performance and cost. This study provides a novel method for developing interface-tuned polymer/graphene composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Mechanical properties of graphene and graphene-based nanocomposites
Papageorgiou, D. G., Kinloch, I. A., & Young, R. J. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.07.004 · Cited by 2,579
Wan, Y.-J., Tang, L.-C., Gong, L.-X., Yan, D., Li, Y.-B., Wu, L.-B., Jiang, J.-X., & Lai, G.-Q. (2014) · Carbon · doi:10.1016/j.carbon.2013.12.050 · Cited by 788
Mechanical properties of epoxy composites filled with silane-functionalized graphene oxide
Wan, Y.-J., Gong, L.-X., Tang, L.-C., Wu, L.-B., & Jiang, J.-X. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.04.023 · Cited by 635
Shi, G., Zhao, Z., Pai, J., Lee, I., Zhang, L., Stevenson, C., Ishara, K., Zhang, R., Zhu, H., & Ma, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602619 · Cited by 399
Self-citationWu, S., Ladani, R. B., Zhang, J., Bafekrpour, E., Ghorbani, K., Mouritz, A. P., Kinloch, A. J., & Wang, C. H. (2015) · Carbon · doi:10.1016/j.carbon.2015.07.026 · Cited by 393
Epoxy Toughening with Low Graphene Loading
Park, Y. T., Qian, Y., Chan, C., Suh, T., Nejhad, M. G., Macosko, C. W., & Stein, A. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402553 · Cited by 362
Ramezanzadeh, B., Bahlakeh, G., & Ramezanzadeh, M. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.03.038 · Cited by 361
Mechanical, Thermal, and Electrical Properties of Graphene-Epoxy Nanocomposites—A Review
Atif, R., Shyha, I., & Inam, F. (2016) · Polymers · doi:10.3390/polym8080281 · Cited by 360
Graphene and graphene derivatives toughening polymers: Toward high toughness and strength
Wang, J., Jin, X., Li, C., Wang, W., Wu, H., & Guo, S. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.03.229 · Cited by 333
Wang, X.-Y., Liao, S.-Y., Wan, Y.-J., Zhu, P.-L., Hu, Y.-G., Zhao, T., Sun, R., & Wong, C.-P. (2022) · Journal of Materials Chemistry C · doi:10.1039/d1tc04702g · Cited by 309
Shi, G., Araby, S., Gibson, C. T., Meng, Q., Zhu, S., & Ma, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706705 · Cited by 267
Self-citation
Metadata
- Authors
- Ma, J., Meng, Q., Michelmore, A., Kawashima, N., Izzuddin, Z., Bengtsson, C., & Kuan, H.-C.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 13
- Pages
- 4255
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W1990656669
- Cited by
- 194
- References
- 0
- FWCI
- 9.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.