The DOI matches its Crossref record.
Novel organic–inorganic flame retardants containing exfoliated graphene: preparation and their performance on the flame retardancy of epoxy resins
Abstract
In this work, a simple and efficient approach for the preparation of organic–inorganic hybrids flame retardants (FRs-rGO), aiming at improving the flame retardant efficiency was presented. The reduced graphite oxide (rGO) was incorporated into the flame retardants matrix by in situ sol–gel process, resulting in the formation of organic–inorganic hybrids flame retardants containing exfoliated rGO. The TEM results of FRs-rGO hybrids revealed that the rGO was previously exfoliated in the phosphorus and silicon containing FRs. Subsequently, the flame retardant (FRs-rGO) was incorporated into epoxy resins (EP). The previous exfoliation of rGO in the FRs allows rGO to be intimately mixed with epoxy resins, which can be confirmed by the TEM results of FRs-rGO/EP nanocomposites. With the incorporation of 5 wt% of FRs-rGO into EP, satisfied flame retardant grade (V0) and the LOI as high as 29.5 were obtained. The char residues of the FRs-rGO/EP nanocomposites were significantly increased in air as well as nitrogen atmosphere. Moreover, the peak heat release rate (pHRR) value of FRs-rGO/EP was significantly reduced by 35%, and the glass transition temperature (Tg) of FRs-rGO/EP nanocomposites shifted to higher temperature, compared to those of neat EP. The flame retardancy strategy of FRs-rGO combines condensed phase and gas phase flame retardant strategies such as the nanocomposites technique, phosphorus–silicon synergism systems in the condensed phase and DOPO flame retardant systems in the gas phase. Moreover, the flame retardants containing exfoliated graphene (FRs-rGO) provided a novel method to prepare organic–inorganic hybrids flame retardants and the as-prepared flame retardants exhibited high flame retardant efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Advanced Flame‐Retardant Methods for Polymeric Materials
Liu, B., Zhao, H., & Wang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202107905 · Cited by 887
Carbon-family materials for flame retardant polymeric materials
Wang, X., Kalali, E. N., Wan, J.-T., & Wang, D.-Y. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.02.001 · Cited by 569
Yu, B., Shi, Y., Yuan, B., Qiu, S., Xing, W., Hu, W., Song, L., Lo, S., & Hu, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06613h · Cited by 415
Self-citationYu, Z., Di, H., Ma, Y., Lv, L., Pan, Y., Zhang, C., & He, Y. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.06.026 · Cited by 341
Epoxy/graphene nanocomposites – processing and properties: a review
Wei, J., Vo, T., & Inam, F. (2015) · RSC Advances · doi:10.1039/c5ra13897c · Cited by 267
Metadata
- Authors
- Qian, X., Song, L., Yu, B., Wang, B., Yuan, B., Shi, Y., Hu, Y., & Yuen, R. K. K.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 23
- Pages
- 6822
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2040855905
- Cited by
- 185
- References
- 0
- FWCI
- 10.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Novel organic–inorganic flame retardants containing exfoliated graphene: preparation and their performance on the flame retardancy of epoxy resins. https://app.cochat.ai/papers/10.1039/c3ta10416h
- The paper
- Qian, X., Song, L., Yu, B., Wang, B., Yuan, B., Shi, Y., Hu, Y., & Yuen, R. K. K. (2013). Novel organic–inorganic flame retardants containing exfoliated graphene: preparation and their performance on the flame retardancy of epoxy resins. Journal of Materials Chemistry A. https://doi.org/10.1039/c3ta10416h
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.