Facile green synthesis of nickel nanostructures using natural polyol and morphology dependent dye adsorption properties
The DOI matches its Crossref record.
Abstract
Ni nanostructures were synthesized using only castor oil (CSO), a natural polyol through green chemistry. CSO acts as multifunctional reagent (solvent, reducing agent, template, surface modifier) for the synthesis of the Ni nanostructures and imparts dye adsorption ability. The morphology of the nanostructures was found to be influenced by variations in the precursor concentration. A three molar concentration resulted in the formation of nanorods (ca. 11 × 75 nm) due to a higher nucleation rate as compared to growth rate, while a six molar concentration produces nanospheres (ca. 15 nm) due to a higher growth rate. The progress of the reaction, synthesis mechanism and surface functionalization of the Ni nanostructures were analyzed by Fourier transform infrared (FT-IR) spectroscopy. The interaction of Ni2+ with electron rich sites in the CSO resulted in the reduction of Ni2+ to Ni(0). The cubic lattice of the synthesized nanostructures, phase and preferred growth direction of the nanorods along the [200] plane were determined by correlation of X-ray diffraction (XRD) results with that of transmission electron microscopy (TEM) analysis. The adsorption ability of the magnetic Ni nanostructures was analyzed using parameters such as the adsorption kinetics (rate and order of adsorption), maximum adsorption capacity (250 mg g−1 (nanospheres) and 142 mg g−1 (nanorods)), effect of initial concentration of dye/adsorbent and contact time. The Langmuir and Freundlich adsorption isotherms were employed for an understanding of the nature (chemisorption or physisorption) of the dye adsorption. The magnetic nature of the adsorbent helps in the fast, economical separation of an adsorbed particle in comparison to non-magnetic dye adsorbents. The better and favorable adsorption (RL value) of the dye on the synthesized Ni nanostructures, makes them a potential adsorbent for the removal of toxic dyes from industrial effluents.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recent advances on the removal of dyes from wastewater using various adsorbents: a critical review
Dutta, S., Gupta, B., Srivastava, S. K., & Gupta, A. K. (2021) · Materials Advances · doi:10.1039/d1ma00354b · Cited by 1,296
Fiévet, F., Ammar-Merah, S., Brayner, R., Chau, F., Giraud, M., Mammeri, F., Peron, J., Piquemal, J.-Y., Sicard, L., & Viau, G. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00777a · Cited by 629
Vegetable oil based eco-friendly coating materials: A review article
Alam, M., Akram, D., Sharmin, E., Zafar, F., & Ahmad, S. (2014) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2013.12.023 · Cited by 458
Self-citationDong, H., Chen, Y.-C., & Feldmann, C. (2015) · Green Chemistry · doi:10.1039/c5gc00943j · Cited by 455
Recent advances in vegetable oils based environment friendly coatings: A review
Sharmin, E., Zafar, F., Akram, D., Alam, M., & Ahmad, S. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.06.022 · Cited by 291
Self-citation
Metadata
- Authors
- Ghosal, A., Shah, J., Kotnala, R. K., & Ahmad, S.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 41
- Pages
- 12868
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W1999047478
- Cited by
- 69
- References
- 0
- FWCI
- 2.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Facile green synthesis of nickel nanostructures using natural polyol and morphology dependent dye adsorption properties. https://app.cochat.ai/papers/10.1039/c3ta12716h
- The paper
- Ghosal, A., Shah, J., Kotnala, R. K., & Ahmad, S. (2013). Facile green synthesis of nickel nanostructures using natural polyol and morphology dependent dye adsorption properties. Journal of Materials Chemistry A. https://doi.org/10.1039/c3ta12716h
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.