The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Super water absorbing and shape memory nanocellulose aerogels from TEMPO-oxidized cellulose nanofibrils via cyclic freezing–thawing
Abstract
Mechanically robust cellulose nanofibril (CNF) aerogels with ultralow density (8 mg cm−3), superior porosity (99.5%), super water absorbency (104 g g−1 water/dried mass), high crystallinity (68.5%) as well as exceptional wet resilience and water activated shape recovery were facilely fabricated for the first time by ice-crystal templated self-assembly of TEMPO oxidized CNFs via cyclic freezing–thawing. With ultrathin widths (1–2 nm), high aspect ratios (several hundreds) and numerous surface polar hydroxyls and carboxyls, TEMPO oxidized CNFs behaved similar to aqueous soluble polymers to form strong freestanding hydrogels by repetitive freezing (−20 °C, 15 h) and thawing (room temperature, 9 h). The spaces occupied by the several hundred microns wide ice crystals were well preserved upon freeze-drying, deriving macroporous CNF aerogels with over 99% porosity of interconnected pores. The freezing induced self-assembling of CNFs was observed at a low concentration of 0.05%, whilst more ordered macroporous honeycomb structures were observed at and above 0.2%. Exchanging water in the CNF hydrogel with tert-butanol generated hierarchical CNF aerogels containing several hundred microns sized macroscopic as well as mesoscopic pores ranging from 2 to 90 nm with further improved specific surface area (117.8 m2 g−1), pore volume (1.19 cm3 g−1) and water absorption (116 g g−1). All CNF aerogels demonstrated super water absorbency, fast water-activated shape recovery in 4 s and reusability for at least 20 times.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemistry of Aerogels and Their Applications
Pierre, A. C., & Pajonk, G. M. (2002) · Chemical Reviews · doi:10.1021/cr0101306 · Cited by 2,239
Ultralight Multiwalled Carbon Nanotube Aerogel
Zou, J., Liu, J., Karakoti, A. S., Kumar, A., Joung, D., Li, Q., Khondaker, S. I., Seal, S., & Zhai, L. (2010) · ACS Nano · doi:10.1021/nn102246a · Cited by 509
Cited by
Wicklein, B., Kocjan, A., Salazar-Alvarez, G., Carosio, F., Camino, G., Antonietti, M., & Bergström, L. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2014.248 · Cited by 1,422
Review of Hydrogels and Aerogels Containing Nanocellulose
De France, K. J., Hoare, T., & Cranston, E. D. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00531 · Cited by 1,344
Chen, Y., Zhang, L., Yang, Y., Pang, B., Xu, W., Duan, G., Jiang, S., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202005569 · Cited by 721
Advanced Materials through Assembly of Nanocelluloses
Kontturi, E., Laaksonen, P., Linder, M. B., Nonappa, Gröschel, A. H., Rojas, O. J., & Ikkala, O. (2018) · Advanced Materials · doi:10.1002/adma.201703779 · Cited by 664
Nanocellulose-based foams and aerogels: processing, properties, and applications
Lavoine, N., & Bergström, L. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02807e · Cited by 656
Metadata
- Authors
- Jiang, F., & Hsieh, Y.-L.
- Venue
- J. Mater. Chem. A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 2
- Issue
- 2
- Pages
- 350-359
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2166660038
- Cited by
- 268
- References
- 2
- FWCI
- 4.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.