The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Hydrogenated under-stoichiometric tungsten oxide anode interlayers for efficient and stable organic photovoltaics
Abstract
In this work a hydrogenated under-stoichiometric tungsten oxide is introduced as an efficient anode interlayer in organic photovoltaics (OPVs). The benefits of hydrogen incorporation into the oxide lattice for obtaining desirable properties of tungsten oxides are explored. These benefits include the occupation of gap states near the Fermi level, which may facilitate charge transport, and the maintenance of a high work function, nearly similar to that of the stoichiometric tungsten oxide, which contributes to the formation of a large interfacial dipole at the anode interface and enhances charge extraction. A large improvement was achieved in the operational characteristics – especially in the open-circuit voltage – of bulk heterojunction solar cells based on different polymeric donors, namely poly(3-hexylthiophene), P3HT, or poly[(9-(1-octylnonyl)-9H-carbazole-2,7-diyl)-2,5-thiophenediyl-2,1,3-benzothiadiazole-4,7-diyl-2,5-thiophenediyl], PCDTBT, and the fullerene acceptor [6,6]-phenyl-C71 butyric acid methyl ester, PC71BM, that incorporated a hydrogenated tungsten oxide as an anode interlayer. This improvement was correlated with the devices' incident photon-to-electron conversion efficiencies (IPCEs) and impedance measurements. Furthermore, an increase in both the device's flat-band voltage (Vfb) and the doping level of the organic semiconductor was measured in P3HT:PC71BM based devices by Mott–Schottky capacitance analysis. Additional benefits are the large process window established for the devices incorporating the hydrogenated tungsten oxide as an anode interlayer and the maintenance of a high PCE (>80% of its initial efficiency) over 50 days, demonstrating good long-term stability, which is much better than that of the conventional devices based on PEDOT:PSS. The results suggest that the interface engineering with hydrogen-treated metal oxide interlayers is an important strategy to develop highly performing and stable organic photovoltaics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Nanostructured Tungsten Oxide – Properties, Synthesis, and Applications
Zheng, H., Ou, J. Z., Strano, M. S., Kaner, R. B., Mitchell, A., & Kalantar‐zadeh, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002477 · Cited by 1,479
Cited by
Interfacial Materials for Organic Solar Cells: Recent Advances and Perspectives
Yin, Z., Wei, J., & Zheng, Q. (2016) · Advanced Science · doi:10.1002/advs.201500362 · Cited by 481
Park, J., Lee, S., Kim, H., Cho, A., Kim, S., Ye, Y., Han, J. W., Lee, H., Jang, J. H., & Lee, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201908122 · Cited by 480
Metadata
- Authors
- Vasilopoulou, M., Soultati, A., Georgiadou, D. G., Stergiopoulos, T., Palilis, L. C., Kennou, S., Stathopoulos, N. A., Davazoglou, D., & Argitis, P.
- Venue
- J. Mater. Chem. A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 2
- Issue
- 6
- Pages
- 1738-1749
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W4252942229
- Cited by
- 197
- References
- 2
- FWCI
- 5.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hydrogenated under-stoichiometric tungsten oxide anode interlayers for efficient and stable organic photovoltaics. https://app.cochat.ai/papers/10.1039/c3ta13975a
- The paper
- Vasilopoulou, M., Soultati, A., Georgiadou, D. G., Stergiopoulos, T., Palilis, L. C., Kennou, S., Stathopoulos, N. A., Davazoglou, D., & Argitis, P. (2014). Hydrogenated under-stoichiometric tungsten oxide anode interlayers for efficient and stable organic photovoltaics. J. Mater. Chem. A. https://doi.org/10.1039/c3ta13975a
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.