The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Fabrication, characterization, properties and theoretical analysis of ceramic/PVDF composite flexible films with high dielectric constant and low dielectric loss
Abstract
Calcium barium zirconate titanate (Ba0.95Ca0.05Zr0.15Ti0.85O3, BCZT) ceramic particles were prepared by a conventional solid-state method. BCZT powders were modified by dopamine through a chemical coating method. The composite flexible films based on dopamine@BCZT and polyvinylidene fluoride were fabricated via a solution casting method. The microstructure and morphology were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, high-resolution transmission electron microscopy, and field emission scanning electron microscopy. A precision impedance analyzer and a dielectric withstand voltage test were used to test the dielectric constant, loss tangent, and breakdown strength. TEM results showed that dopamine was uniformly coated on the surface of BCZT particles with an average thickness of 20 nm. SEM results showed that the ceramic particles were dispersed homogeneously in the matrix. The dielectric constant increased with the increase of BCZT contents, while the loss tangent remained constant in the frequency range of 103 to 105 Hz. Different theoretical models were employed to predict the effective dielectric constants of the composite films, and the estimated results were compared with the experimental data. Weibull distribution was used to analyze the dielectric breakdown strength, and the results showed that the breakdown strength decreased then stayed over 60 kV mm−1.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Statistical Distribution Function of Wide Applicability
Weibull, W. (1951) · Journal of Applied Mechanics · doi:10.1115/1.4010337 · Cited by 11,604
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965
Ferroelectric Ceramics: History and Technology
Haertling, G. H. (1999) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1999.tb01840.x · Cited by 4,051
A Dielectric Polymer with High Electric Energy Density and Fast Discharge Speed
Chu, B., Zhou, X., Ren, K., Neese, B., Lin, M., Wang, Q., Bauer, F., & Zhang, Q. M. (2006) · Science · doi:10.1126/science.1127798 · Cited by 2,453
Lovinger, A. J. (1983) · Science · doi:10.1126/science.220.4602.1115 · Cited by 1,939
Gregorio, Jr., & Cestari, M. (1994) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1994.090320509 · Cited by 1,163
Crystal Structures of Three Crystalline Forms of Poly(vinylidene fluoride)
Hasegawa, R., Takahashi, Y., Chatani, Y., & Tadokoro, H. (1972) · Polymer Journal · doi:10.1295/polymj.3.600 · Cited by 939
High Energy Density Nanocomposites Based on Surface-Modified BaTiO3 and a Ferroelectric Polymer
Kim, P., Doss, N. M., Tillotson, J. P., Hotchkiss, P. J., Pan, M.-J., Marder, S. R., Li, J., Calame, J. P., & Perry, J. W. (2009) · ACS Nano · doi:10.1021/nn9006412 · Cited by 818
Electrical properties of polymers
(2006) · Choice Reviews Online · doi:10.5860/choice.43-5895 · Cited by 768
FTIR AND DSC STUDIES OF MECHANICALLY DEFORMED β-PVDF FILMS
Lanceros-Méndez, S., Mano, J. F., Costa, A. M., & Schmidt, V. H. (2001) · Journal of Macromolecular Science, Part B · doi:10.1081/mb-100106174 · Cited by 498
Song, Y., Shen, Y., Liu, H., Lin, Y., Li, M., & Nan, C.-W. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30297g · Cited by 304
Crystal polymorphism in electrospun composite nanofibers of poly(vinylidene fluoride) with nanoclay
Lei, Y., & Cebe, P. (2009) · Polymer · doi:10.1016/j.polymer.2009.03.003 · Cited by 232
Lin, M.-F., Thakur, V. K., Tan, E. J., & Lee, P. S. (2011) · RSC Advances · doi:10.1039/c1ra00210d · Cited by 188
Jain, T. A., Fung, K., & Chan, J. (2008) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.01.073 · Cited by 37
Cited by
A critical analysis of the α, β and γ phases in poly(vinylidene fluoride) using FTIR
Cai, X., Lei, T., Sun, D., & Lin, L. (2017) · RSC Advances · doi:10.1039/c7ra01267e · Cited by 1,788
Prateek, Thakur, V. K., & Gupta, R. K. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00495 · Cited by 1,659
Liu, Y.-J., Cao, W.-T., Ma, M.-G., & Wan, P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07639 · Cited by 544
An overview of lead-free piezoelectric materials and devices
Wei, H., Wang, H., Xia, Y., Cui, D., Shi, Y., Dong, M., Liu, C., Ding, T., Zhang, J., Ma, Y., et al. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc04515a · Cited by 393
Fu, J., Hou, Y., Zheng, M., Wei, Q., Zhu, M., & Yan, H. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b05344 · Cited by 350
Metadata
- Authors
- Luo, B., Wang, X., Wang, Y., & Li, L.
- Venue
- J. Mater. Chem. A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 2
- Issue
- 2
- Pages
- 510-519
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2024263001
- Cited by
- 448
- References
- 14
- FWCI
- 12.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.