Harvest of Cu NP anchored magnetic carbon materials from Fe/Cu preloaded biomass: their pyrolysis, characterization, and catalytic activity on aqueous reduction of 4-nitrophenol
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
In the present study, a value-added Cu NP anchored magnetic carbon (Cu&Fe3O4-mC) material was obtained directly by fast pyrolysis of heavy metal polluted biomass (derived from a biosorption process using fir sawdust to remove Cu(II) from synthetic wastewater). The composition and structure of the Cu&Fe3O4-mC were characterized by various physicochemical techniques, which indicated that the Cu NPs were monodispersed on the mesoporous carbon support with an average particle size of 21.2 nm. The material shows favorable activity and separability on the catalytic reduction of 4-nitrophenol, and can be reused several times without a decrease in the catalytic activity. The maximum release concentration of Cu during the recycling process is 0.7 mg L−1, which is below the limit of the Cu concentration in the surface water. This study would provide a green and sustainable pathway for simultaneous disposal of the biomass waste, removal of the heavy metal pollution, and pretreatment of 4-nitrophenol.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Simultaneous immobilization of lead and atrazine in contaminated soils using dairy-manure biochar
Cao, X., Ma, L., Liang, Y., Gao, B., & Harris, W. (2011) · Environmental Science & Technology · doi:10.1021/es103752u · Cited by 584
Product Distribution from the Fast Pyrolysis of Hemicellulose
Patwardhan, P. R., Brown, R. C., & Shanks, B. H. (2011) · ChemSusChem · doi:10.1002/cssc.201000425 · Cited by 463
Cited by
Development of biochar-based functional materials: toward a sustainable platform carbon material
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00195 · Cited by 1,754
Self-citationZhao, P., Feng, X., Huang, D., Yang, G., & Astruc, D. (2015) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.01.002 · Cited by 827
Fates of Chemical Elements in Biomass during Its Pyrolysis
Liu, W.-J., Li, W.-W., Jiang, H., & Yu, H.-Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00647 · Cited by 614
Self-citationThermochemical conversion of lignin to functional materials: a review and future directions
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2015) · Green Chemistry · doi:10.1039/c5gc01054c · Cited by 571
Self-citationLing, L.-L., Liu, W.-J., Zhang, S., & Jiang, H. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b02382 · Cited by 407
Self-citationLi, R., Wang, J. J., Gaston, L. A., Zhou, B., Li, M., Xiao, R., Wang, Q., Zhang, Z., Huang, H., Liang, W., et al. (2018) · Carbon · doi:10.1016/j.carbon.2017.12.070 · Cited by 360
Preparation and Application of Biochar-Based Catalysts for Biofuel Production
Cheng, F., & Li, X. (2018) · Catalysts · doi:10.3390/catal8090346 · Cited by 293
Chi, N. T. L., Anto, S., Ahamed, T. S., Kumar, S. S., Shanmugam, S., Samuel, M. S., Mathimani, T., Brindhadevi, K., & Pugazhendhi, A. (2021) · Fuel · doi:10.1016/j.fuel.2020.119411 · Cited by 291
Shen, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01228g · Cited by 263
Application of biochar-based catalysts in biomass upgrading: A review
Cao, X., Sun, S., & Sun, R. (2017) · RSC Adv. · doi:10.1039/c7ra09307a · Cited by 249
Zhu, S., Ho, S.-H., Huang, X., Wang, D., Yang, F., Wang, L., Wang, C., Cao, X., & Ma, F. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00542 · Cited by 233
Biomass-derived Biochar: From Production to Application in Removing Heavy Metal-Contaminated Water
Chen, W.-H., Hoang, A. T., Nižetić, S., Pandey, A., Cheng, C. K., Luque, R., Ong, H. C., Thomas, S., & Nguyen, X. P. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.02.061 · Cited by 201
Cui, X., Zhang, J., Wang, X., Pan, M., Lin, Q., Khan, K. Y., Yan, B., Li, T., He, Z., Yang, X., et al. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123832 · Cited by 149
Valorisation of post-sorption materials: Opportunities, strategies, and challenges
Harikishore Kumar Reddy, D., Vijayaraghavan, K., Kim, J. A., & Yun, Y.-S. (2017) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2016.12.002 · Cited by 127
“2 nm) anchored magnetic carbon (Cu and Fe3O4-mc) was manufactured by fast pyrolysis of Fe/Cu adsorbed fir sawdust biomass and the material was used as a catalyst for the catalytic reduction of 4-nitrophenol [316].”
Method
Metadata
- Authors
- Liu, W.-J., Tian, K., Jiang, H., & Yu, H.-Q.
- Venue
- Green Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014-06-25
- Volume
- 16
- Issue
- 9
- Pages
- 4198
- ISSN
- 1463-9262 (ISSN-L)
- 1463-9270
- OpenAlex
- W2086725713
- Cited by
- 149
- References
- 3
- FWCI
- 4.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.