The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Borophene as an extremely high capacity electrode material for Li-ion and Na-ion batteries
Open accessAbstract
"Two-dimensional (2D) materials as electrodes" is believed to be the trend for future Li-ion and Na-ion battery technologies. Here, by using first-principles methods, we predict that the recently reported borophene (2D boron sheets) can serve as an ideal electrode material with high electrochemical performance for both Li-ion and Na-ion batteries. The calculations are performed on two experimentally stable borophene structures, namely β12 and χ3 structures. The optimized Li and Na adsorption sites are identified, and the host materials are found to maintain good electric conductivity before and after adsorption. Besides advantages including small diffusion barriers and low average open-circuit voltages, most remarkably, the storage capacity can be as high as 1984 mA h g(-1) in β12 borophene and 1240 mA h g(-1) in χ3 borophene for both Li and Na, which are several times higher than the commercial graphite electrode and are the highest among all the 2D materials discovered to date. Our results highly support that borophenes can be appealing anode materials for both Li-ion and Na-ion batteries with extremely high power density.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
A climbing image nudged elastic band method for finding saddle points and minimum energy paths
Henkelman, G., Uberuaga, B. P., & Jónsson, H. (2000) · The Journal of Chemical Physics · doi:10.1063/1.1329672 · Cited by 21,620
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Generalized gradient approximation for the exchange-correlation hole of a many-electron system
Perdew, J. P., Burke, K., & Wang, Y. (1996) · Physical Review B · doi:10.1103/physrevb.54.16533 · Cited by 6,861
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
Synthesis of borophenes: Anisotropic, two-dimensional boron polymorphs
Mannix, A. J., Zhou, X.-F., Kiraly, B., Wood, J. D., Alducin, D., Myers, B. D., Liu, X., Fisher, B. L., Santiago, U., Guest, J. R., et al. (2015) · Science · doi:10.1126/science.aad1080 · Cited by 2,744
Cited by
Borophene as a prototype for synthetic 2D materials development
Mannix, A. J., Zhang, Z., Guisinger, N. P., Yakobson, B. I., & Hersam, M. C. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0157-4 · Cited by 598
Two-dimensional boron: structures, properties and applications
Zhang, Z., Penev, E. S., & Yakobson, B. I. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00261k · Cited by 464
Flexible Molybdenum Disulfide (MoS2) Atomic Layers for Wearable Electronics and Optoelectronics
Singh, E., Singh, P., Kim, K. S., Yeom, G. Y., & Nalwa, H. S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b19859 · Cited by 407
Emerging beyond-graphene elemental 2D materials for energy and catalysis applications
Fan, F. R., Wang, R., Zhang, H., & Wu, W. (2021) · Chemical Society Reviews · doi:10.1039/c9cs00821g · Cited by 402
Zhang, X., Yu, Z., Wang, S.-S., Guan, S., Yang, H. Y., Yao, Y., & Yang, S. A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07065e · Cited by 387
Self-citationTwo-Dimensional Materials to Address the Lithium Battery Challenges
Rojaee, R., & Shahbazian-Yassar, R. (2020) · ACS Nano · doi:10.1021/acsnano.9b08396 · Cited by 344
Review of borophene and its potential applications
Wang, Z.-Q., Lü, T.-Y., Wang, H.-Q., Feng, Y. P., & Zheng, J.-C. (2019) · Frontiers of Physics · doi:10.1007/s11467-019-0884-5 · Cited by 340
Recent progress on graphene-analogous 2D nanomaterials: Properties, modeling and applications
Liu, B., & Zhou, K. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.09.004 · Cited by 329
The Rise of 2D Photothermal Materials beyond Graphene for Clean Water Production
Xie, Z., Duo, Y., Lin, Z., Fan, T., Xing, C., Yu, L., Wang, R., Qiu, M., Zhang, Y., Zhao, Y., et al. (2020) · Advanced Science · doi:10.1002/advs.201902236 · Cited by 320
Li, H., Jing, L., Liu, W., Lin, J., Tay, R. Y., Tsang, S. H., & Teo, E. H. T. (2018) · ACS Nano · doi:10.1021/acsnano.7b07444 · Cited by 314
The Emergence and Evolution of Borophene
Ou, M., Wang, X., Yu, L., Liu, C., Tao, W., Ji, X., & Mei, L. (2021) · Advanced Science · doi:10.1002/advs.202001801 · Cited by 290
Borophene: New Sensation in Flatland
Ranjan, P., Lee, J. M., Kumar, P., & Vinu, A. (2020) · Advanced Materials · doi:10.1002/adma.202000531 · Cited by 263
Xiao, B., Li, Y.-C., Yu, X.-F., & Cheng, J.-B. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12727 · Cited by 258
Chen, K., Wang, Z., Wang, L., Wu, X., Hu, B., Liu, Z., & Wu, M. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00662-y · Cited by 77
Metadata
- Authors
- Zhang, X., Hu, J., Cheng, Y., Yang, H. Y., Yao, Y., & Yang, S. A.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2016
- Volume
- 8
- Issue
- 33
- Pages
- 15340-15347
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W2486443130
- Cited by
- 562
- References
- 50
- FWCI
- 19.21
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.