Winding condition monitoring scheme for a permanent magnet machine using high-frequency injection
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This study presents a new technique for condition monitoring of motor windings in variable speed drive systems. The technique employs high-frequency injection to monitor the machine's incremental inductances. These inductances can provide an indication of changes in the magnetic signature owing to the presence of electrical faults. The Space modulation profiling (SMP) technique is used to create a look-up table that defines the healthy incremental inductance signature of the drive as a function of load and rotor position. A similar signature is obtained online; this is compared with the SMP look-up table to derive an error signal which can be used to trigger warnings or alarms as faults develop. In this study, the emphasis is on the detection of stator winding faults in a permanent magnet AC machine, including incipient and short-circuit faults. The result is a monitoring scheme with improved sensitivity with respect to monitoring schemes based on the passive measurement of terminal quantities. Experimental results show that the monitoring scheme has a fast response and high sensitivity which make it suitable for predicting faults at an early stage of development, before they degenerate into a serious fault which requires drive shutdown.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of condition monitoring of rotating electrical machines
Tavner, P. J. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070280 · Cited by 531
Cited by
Rafaq, M. S., & Jung, J.-W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2944413 · Cited by 266
Choi, S., Haque, M. S., Tarek, M. T. B., Mulpuri, V., Duan, Y., Das, S., Garg, V., Ionel, D. M., Masrur, M. A., Mirafzal, B., et al. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2819627 · Cited by 192
Comprehensive review on inter‐turn fault indexes in permanent magnet motors
Faiz, J., Nejadi‐Koti, H., & Valipour, Z. (2017) · IET Electric Power Applications · doi:10.1049/iet-epa.2016.0196 · Cited by 86
Jiang, Y., Zhang, Z., Jiang, W., Geng, W., & Huang, J. (2018) · IET Electric Power Applications · doi:10.1049/iet-epa.2017.0754 · Cited by 45
Improved ZSVC‐based fault detection technique for incipient stage inter‐turn fault in PMSM
Fang, J., Sun, Y., Wang, Y., Wei, B., & Hang, J. (2019) · IET Electric Power Applications · doi:10.1049/iet-epa.2019.0016 · Cited by 30
Metadata
- Authors
- Arellano-Padilla, J., Sumner, M., & Gerada, C.
- Venue
- IET Electric Power Applications
- Published
- 2011-01-04
- Volume
- 5
- Issue
- 1
- Pages
- 89-99
- ISSN
- 1751-8660 (ISSN-L)
- 1751-8679
- OpenAlex
- W1979692479
- Cited by
- 76
- References
- 1
- FWCI
- 5.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.