Interior permanent magnet motor‐based isolated on‐board integrated battery charger for electric vehicles
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This study proposes an isolated on‐board integrated battery charger using an interior permanent magnet (IPM) machine with a nine‐slot/eight‐pole combination or its multiples, and equipped with a non‐overlapped fractional slot concentrated winding. The proposed winding layout comprises three three‐phase winding sets that are connected in such a way as to provide six motor terminals. Hence, a six‐phase or two three‐phase converters will be required for propulsion. Under motoring mode, the machine can be effectively regarded as a six‐phase machine, which provides a high fault‐tolerant capability, and allows for a ‘limp home’ mode of operation. Additionally, all magneto motive force subharmonics are eliminated, which significantly reduces the induced rotor eddy current losses, when compared with a conventional three‐phase motor having the same slot/pole combination. In battery charging mode, the winding is reconfigured, so that the machine is considered as a three‐phase to six‐phase rotating transformer. A 40 kW IPM machine is designed and simulated under different modes of operation using two‐dimensional finite element analysis to validate the proposed concept. A small‐scale prototype machine is also used for experimental validation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Grid-Connected Integrated Battery Chargers in Vehicle Applications: Review and New Solution
Haghbin, S., Lundmark, S., Alakula, M., & Carlson, O. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2187414 · Cited by 345
Cited by
Electric Vehicle Charging Infrastructure: From Grid to Battery
Rivera, S., Kouro, S., Vazquez, S., Goetz, S. M., Lizana, R., & Romero-Cadaval, E. (2021) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2020.3039039 · Cited by 301
“, through increased dc-link capacitance [38].”
BackgroundMetwly, M. Y., Abdel-Majeed, M. S., Abdel-Khalik, A. S., Hamdy, R. A., Hamad, M. S., & Ahmed, S. (2020) · IEEE Access · doi:10.1109/access.2020.2992741 · Cited by 229
“On the other hand, PMSMs have the highest efficiency among all other EV drivelines [13].”
BackgroundMethodSelf-citationA Review of on-Board Integrated Electric Vehicles Charger and a New Single-Phase Integrated Charger
Harbin Institute of Technology, Na, T., Yuan, X., Harbin Institute of Technology, Tang, J., Harbin Institute of Technology, hang, Q. Z., & Harbin Institute of Technology (2019) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2019.00027 · Cited by 68
“An isolated threephase integrated charger based on nine-slot/eight-pole motor is proposed in [50].”
MethodRaherimihaja, H. J., Zhang, Q., Xu, G., & Zhang, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2978684 · Cited by 45
Metadata
- Authors
- Abdel‐Khalik, A. S., Massoud, A., & Ahmed, S.
- Venue
- IET Electric Power Applications
- Published
- 2017-10-30
- Volume
- 12
- Issue
- 1
- Pages
- 124-134
- ISSN
- 1751-8660 (ISSN-L)
- 1751-8679
- OpenAlex
- W2753961286
- Cited by
- 39
- References
- 1
- FWCI
- 1.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Interior permanent magnet motor‐based isolated on‐board integrated battery charger for electric vehicles. https://app.cochat.ai/papers/10.1049/iet-epa.2017.0319
- The paper
- Abdel‐Khalik, A. S., Massoud, A., & Ahmed, S. (2018). Interior permanent magnet motor‐based isolated on‐board integrated battery charger for electric vehicles. IET Electric Power Applications. https://doi.org/10.1049/iet-epa.2017.0319
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.