The DOI matches its Crossref record.
Fuel cell power conditioning for electric power applications: a summary
Abstract
Fuel cells are considered to be one of the most promising sources of distributed energy because of their high efficiency, low environmental impact and scalability. Unfortunately, multiple complications exist in fuel cell operation. Fuel cells cannot accept current in the reverse direction, do not perform well with ripple current, have a low output voltage that varies with age and current, respond sluggishly to step changes in load and are limited in overload capabilities. For these reasons, power converters are often necessary to boost and regulate the voltage as a means to provide a stiff applicable DC power source. Furthermore, the addition of an inverter allows for the conversion of DC power to AC for an utility interface or for the application of an AC motor. To help motivate the use of power conditioning for the fuel cell, a brief introduction of the different types, applications and typical electrical characteristics of fuel cells is presented. This is followed by an examination of the various topologies of DC–DC boost converters and inverters used for power conditioning of fuel cells. Several architectures to aggregate multiple fuel cells for high-voltage/high-power applications are also reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Defects on carbons for electrocatalytic oxygen reduction
Yan, X., Jia, Y., & Yao, X. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00690j · Cited by 593
Recent advances and challenges of fuel cell based power system architectures and control – A review
Das, V., Padmanaban, S., Venkitusamy, K., Selvamuthukumaran, R., Blaabjerg, F., & Siano, P. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.148 · Cited by 459
Recent applications of big data analytics in railway transportation systems: A survey
Ghofrani, F., He, Q., Goverde, R. M. P., & Liu, X. (2018) · Transportation Research Part C: Emerging Technologies · doi:10.1016/j.trc.2018.03.010 · Cited by 320
Zhou, D., Wang, H., & Blaabjerg, F. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2769161 · Cited by 200
Metadata
- Authors
- Yu, X., Starke, M. R., Tolbert, L. M., & Ozpineci, B.
- Venue
- IET Electric Power Applications
- Published
- 2007-09
- Volume
- 1
- Issue
- 5
- Pages
- 643-656
- ISSN
- 1751-8660 (ISSN-L)
- 1751-8679
- OpenAlex
- W2002729971
- Cited by
- 262
- References
- 0
- FWCI
- 14.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fuel cell power conditioning for electric power applications: a summary. https://app.cochat.ai/papers/10.1049/iet-epa:20060386
- The paper
- Yu, X., Starke, M. R., Tolbert, L. M., & Ozpineci, B. (2007). Fuel cell power conditioning for electric power applications: a summary. IET Electric Power Applications. https://doi.org/10.1049/iet-epa%3A20060386
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.