Fast power switch failure detection for fault tolerant voltage source inverters using FPGA
The DOI matches its Crossref record.
Abstract
The design, implementation, experimental validation and performances of a fully digital fast power switch failure detection and compensation for fault-tolerant voltage source inverters (VSIs) are discussed. The approach introduced minimises the time interval between the fault occurrence and its diagnosis. The possibility to detect a faulty switch or driver of the VSI in less than 10 µs by using simultaneously a ‘time criterion’ and a ‘voltage criterion’ is demonstrated. In order to attain this short detection time a field programmable gate array (FPGA) is used. The studied fault detection method is implemented using a FPGA and experimentally validated for a three-phase VSI used in shunt active filter case. The proposed method tested first by ‘FPGA in the loop’ prototyping has been also validated through a fully experimental active power filter which confirms the satisfactory performances of the proposed approach. Moreover, the other feature introduced in this approach is that the control scheme and the fault-tolerant scheme are both programmed in only one FPGA.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics
Wang, H., Liserre, M., Blaabjerg, F., de Place Rimmen, P., Jacobsen, J. B., Kvisgaard, T., & Landkildehus, J. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2290282 · Cited by 693
“The use of fast digital computational devices [85] and the integration in the power module of the extra leg and of a thyristor that can survive high energy pulses [86] are the enabling technologies to isolate a faulty leg and online substitute it with a healthy one.”
BackgroundSurvey of fault-tolerance techniques for three-phase voltage source inverters
Mirafzal, B. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301712 · Cited by 440
An, Q.-T., Sun, L.-Z., Zhao, K., & Sun, L. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2052472 · Cited by 262
Naseri, F., Schaltz, E., Lu, K., & Farjah, E. (2020) · IET Power Electronics · doi:10.1049/iet-pel.2019.1498 · Cited by 37
Metadata
- Authors
- Karimi, S., Poure, P., & Saadate, S.
- Venue
- IET Power Electronics
- Published
- 2009-07-02
- Volume
- 2
- Issue
- 4
- Pages
- 346-354
- ISSN
- 1755-4535 (ISSN-L)
- 1755-4543
- OpenAlex
- W2010300984
- Cited by
- 78
- References
- 0
- FWCI
- 2.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fast power switch failure detection for fault tolerant voltage source inverters using FPGA. https://app.cochat.ai/papers/10.1049/iet-pel.2008.0075
- The paper
- Karimi, S., Poure, P., & Saadate, S. (2009). Fast power switch failure detection for fault tolerant voltage source inverters using FPGA. IET Power Electronics. https://doi.org/10.1049/iet-pel.2008.0075
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.