The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Maximum photovoltaic power tracking: an algorithm for rapidly changing atmospheric conditions
Abstract
As the maximum power operating point (MPOP) of photovoltaic (PV) power generation systems changes with changing atmospheric conditions (e.g. solar radiation and temperature), an important consideration in the design of efficient PV systems is to track the MPOP correctly. Many maximum power tracking (MPT) techniques have been considered in the past but techniques using microprocessors with appropriate MPT algorithms are favoured because of their flexibility and compatibility with different PV arrays. Although the efficiency of these MPT algorithms is usually high, it drops noticeably in cases of rapidly changing atmospheric conditions. The authors have developed a new MPT algorithm based on the fact that the MPOP of a PV generator can be tracked accurately by comparing the incremental and instantaneous conductances of the PV array. The work was carried out by both simulation and experiment, with results showing that the developed incremental conductance (IncCond) algorithm has successfully tracked the MPOP, even in cases of rapidly changing atmospheric conditions, and has higher efficiency than ordinary algorithms in terms of total PV energy transferred to the load.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pressman, A. I. (1991) · Cited by 1,134
Dynamic Behavior of a Class of Photovoltaic Power Systems
Wasynezuk, O. (1983) · IEEE Transactions on Power Apparatus and Systems · doi:10.1109/tpas.1983.318109 · Cited by 362
A Hybrid Photovoltaic Simulator for Utility Interactive Studies
Vachtsevanos, G., & Kalaitzakis, K. C. (1987) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.1987.4765834 · Cited by 97
Cited by
Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques
Esram, T., & Chapman, P. L. (2007) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.874230 · Cited by 5,425
Comprehensive Approach to Modeling and Simulation of Photovoltaic Arrays
Villalva, M. G., Gazoli, J. R., & Filho, E. R. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2013862 · Cited by 4,390
Optimization of Perturb and Observe Maximum Power Point Tracking Method
Femia, N., Petrone, G., Spagnuolo, G., & Vitelli, M. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.850975 · Cited by 3,002
A Variable Step Size INC MPPT Method for PV Systems
Liu, F., Duan, S., Liu, F., Liu, B., & Kang, Y. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.920550 · Cited by 1,313
Review of the maximum power point tracking algorithms for stand-alone photovoltaic systems
Salas, V., Olías, E., Barrado, A., & Lázaro, A. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2005.10.023 · Cited by 1,183
Metadata
- Authors
- Hussein, K. H.
- Venue
- IEE Proceedings - Generation, Transmission and Distribution
- Published
- 1995
- Volume
- 142
- Issue
- 1
- Pages
- 59
- ISSN
- 1350-2360 (ISSN-L)
- OpenAlex
- W1981274891
- Cited by
- 1,764
- References
- 3
- FWCI
- 0.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.