The DOI matches its Crossref record.
Use of Sewage Sludge Ash as Brick Material
Abstract
Brick manufactured from incinerated sewage sludge ash and clay is investigated. The results of Atterberg limits tests of molded ash-clay mixtures indicated that both plastic index and dry shrinkage decrease with an increasing amount of ash in the mixture. Results of tests indicated that the ash proportion and firing temperature were the two key factors determining the quality of brick. Increasing the firing temperature and decreasing the amount of ash in the brick resulted in a decrease of water absorption. The appropriate percentage of ash content for producing quality bricks was in the range of 20 to 40% by weight with a 13 to 15% optimum moisture content prepared in the molded mixture and firing at 1,000°C for 6 h. With 10% ash content, the ash-clay bricks exhibited higher compressive strength than normal clay bricks. This study showed that the pulverized sludge ash could be used as brick material. The bonding strength can be further enhanced by controlling operating conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recycling and recovery routes for incinerated sewage sludge ash (ISSA): a review
Donatello, S., & Cheeseman, C. R. (2013) · Waste Management · doi:10.1016/j.wasman.2013.05.024 · Cited by 489
Smol, M., Kulczycka, J., Henclik, A., Gorazda, K., & Wzorek, Z. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.051 · Cited by 487
Technological and environmental behavior of sewage sludge ash (SSA) in cement-based materials
Cyr, M., Coutand, M., & Clastres, P. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.04.003 · Cited by 321
Metadata
- Authors
- Lin, D.-F., & Weng, C.-H.
- Venue
- Journal of Environmental Engineering
- Published
- 2001-10
- Volume
- 127
- Issue
- 10
- Pages
- 922-927
- ISSN
- 0733-9372 (ISSN-L)
- 1943-7870
- DOI
- 10.1061/(asce)0733-9372(2001)127:10(922
- OpenAlex
- W1995803779
- Cited by
- 175
- References
- 0
- FWCI
- 8.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Use of Sewage Sludge Ash as Brick Material. https://app.cochat.ai/papers/10.1061/(asce)0733-9372(2001)127:10(922
- The paper
- Lin, D.-F., & Weng, C.-H. (2001). Use of Sewage Sludge Ash as Brick Material. Journal of Environmental Engineering. https://doi.org/10.1061/(asce)0733-9372(2001)127%3A10(922
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.