The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Shape‐Memory Alloys as New Materials for Aseismic Isolation
Abstract
New results are presented in the area of hysteretic modeling and experimental characterization of shape memory alloys (SMAs). A stress‐induced micromechanical phase transition occurs in SMAs that causes inelastic deformation and gives rise to a large energy‐absorbing capacity. Because it is possible to achieve large hysteretic deformation in SMAs without incurring plastic deformation, SMAs have potential for use in earthquake‐engineering passive damping schemes. In order to represent such energy‐absorbing behavior, an existing one‐dimensional model of hysteresis is modified to include the macroscopic characteristics of SMAs. Also, the results of cyclic material‐characterization tests applied to a nickel‐titanium SMA known as Nitinol are presented. Hysteretic behavior closely resembling that of the superelastic material was obtained in the laboratory for cyclic strain levels up to 4.5%. The model of SMA behavior is also compared to the cyclic responses of Nitinol.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Method for Random Vibration of Hysteretic Systems
Wen, Y.-K. (1976) · Journal of the Engineering Mechanics Division · doi:10.1061/jmcea3.0002106 · Cited by 2,668
Aseismic base isolation: review and bibliography
Kelly, J. M. (1986) · Soil Dynamics and Earthquake Engineering · doi:10.1016/0267-7261(86)90006-0 · Cited by 691
Teflon Bearings in Base Isolation II: Modeling
Constantinou, M., Mokha, A., & Reinhorn, A. (1990) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(1990)116:2(455 · Cited by 629
Transformation pseudoelasticity and deformation behavior in a Ti-50.6at%Ni alloy
Miyazaki, S., Otsuka, K., & Suzuki, Y. (1981) · Scripta Metallurgica · doi:10.1016/0036-9748(81)90346-x · Cited by 497
Warlimont, H., Delaey, L., Krishnan, R., & Tas, H. (1974) · Journal of Materials Science · doi:10.1007/bf00552941 · Cited by 243
Krishnan, R., Delaey, L., Tas, H., & Warlimont, H. (1974) · Journal of Materials Science · doi:10.1007/bf00552940 · Cited by 106
Cited by
Stimulus-responsive shape memory materials: a review
Sun, L., Huang, W. M., Ding, Z., Zhao, Y., Wang, C. C., Purnawali, H., & Tang, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.04.065 · Cited by 1,105
An overview of vibration and seismic applications of NiTi shape memory alloy
Saadat, S., Salichs, J., Noori, M., Hou, Z., Davoodi, H., Bar-on, I., Suzuki, Y., & Masuda, A. (2002) · Smart Materials and Structures · doi:10.1088/0964-1726/11/2/305 · Cited by 384
Carboni, B., Lacarbonara, W., & Auricchio, F. (2015) · Journal of Engineering Mechanics · doi:10.1061/(asce)em.1943-7889.0000852 · Cited by 87
Recentering Shape Memory Alloy Passive Damper for Structural Vibration Control
Qian, H., Li, H., Song, G., & Guo, W. (2013) · Mathematical Problems in Engineering · doi:10.1155/2013/963530 · Cited by 82
Compliant liquid column damper modified by shape memory alloy device for seismic vibration control
Gur, S., Mishra, S. K., Bhowmick, S., & Chakraborty, S. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/10/105009 · Cited by 30
Metadata
- Authors
- Graesser, E. J., & Cozzarelli, F. A.
- Venue
- Journal of Engineering Mechanics
- Published
- 1991-11
- Volume
- 117
- Issue
- 11
- Pages
- 2590-2608
- ISSN
- 0733-9399 (ISSN-L)
- 1943-7889
- DOI
- 10.1061/(asce)0733-9399(1991)117:11(2590
- OpenAlex
- W1979962271
- Cited by
- 414
- References
- 6
- FWCI
- 1.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Shape‐Memory Alloys as New Materials for Aseismic Isolation. https://app.cochat.ai/papers/10.1061/(asce)0733-9399(1991)117:11(2590
- The paper
- Graesser, E. J., & Cozzarelli, F. A. (1991). Shape‐Memory Alloys as New Materials for Aseismic Isolation. Journal of Engineering Mechanics. https://doi.org/10.1061/(asce)0733-9399(1991)117%3A11(2590
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.