The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Hysteresis Modeling of Wood Joints and Structural Systems
Abstract
General features of the hysteretic behavior of wood joints and structural systems are characterized, and the available hysteresis models for wood systems are reviewed. A general hysteresis model for single- and multiple-degree-of-freedom wood joints and structural systems, based on a modification of the Bouc-Wen-Baber-Noori model, is presented and used in nonlinear dynamic analysis of single-degree-of-freedom wood systems. The hysteretic constitutive law produces a smoothly varying hysteresis that models previously observed behavior of wood joints and structural systems, such as nonlinearity, strength and stiffness degradation, and pinching. It takes into account the experimentally observed dependence of wood joints' response to the input and response at an earlier time (known as memory). Hysteresis shapes produced by the model are shown to compare favorably with experimental hysteresis of wood joints with (1) yielding plates; (2) yielding nails; and (3) yielding bolts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Forced vibrations of mechanical systems with hysteresis
Bouc, R. (1967) · Cited by 649
Equivalent Linearization for Hysteretic Systems Under Random Excitation
Wen, Y. K. (1980) · Journal of Applied Mechanics · doi:10.1115/1.3153594 · Cited by 562
Random Vibration of Hysteretic, Degrading Systems
Baber, T. T., & Wen, Y.-K. (1981) · Journal of the Engineering Mechanics Division · doi:10.1061/jmcea3.0002768 · Cited by 468
Random Vibration of Degrading, Pinching Systems
Baber, T. T., & Noori, M. N. (1985) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1985)111:8(1010 · Cited by 390
Modeling General Hysteresis Behavior and Random Vibration Application
Baber, T. T., & Noori, M. N. (1986) · Journal of Vibration and Acoustics · doi:10.1115/1.3269364 · Cited by 180
Systems Identification of Degrading Hysteretic Restoring Forces
Sues, R. H., Mau, S. T., & Wen, Y. K. (1988) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1988)114:5(833 · Cited by 162
Cited by
The Hysteresis Bouc-Wen Model, a Survey
Ismail, M., Ikhouane, F., & Rodellar, J. (2009) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-009-9031-8 · Cited by 740
Nonlinear dynamic characterization of a new hysteretic device: experiments and computations
Carboni, B., & Lacarbonara, W. (2016) · Nonlinear Dynamics · doi:10.1007/s11071-015-2305-9 · Cited by 87
Carboni, B., Lacarbonara, W., & Auricchio, F. (2015) · Journal of Engineering Mechanics · doi:10.1061/(asce)em.1943-7889.0000852 · Cited by 87
Seismic effectiveness of hysteretic tuned mass dampers for inelastic structures
Boccamazzo, A., Carboni, B., Quaranta, G., & Lacarbonara, W. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.110591 · Cited by 31
Aloisio, A., Boggian, F., Tomasi, R., & Fragiacomo, M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123046 · Cited by 30
Metadata
- Authors
- Foliente, G. C.
- Venue
- Journal of Structural Engineering
- Published
- 1995-06
- Volume
- 121
- Issue
- 6
- Pages
- 1013-1022
- ISSN
- 0733-9445 (ISSN-L)
- 1943-541X
- DOI
- 10.1061/(asce)0733-9445(1995)121:6(1013
- OpenAlex
- W2092706577
- Cited by
- 315
- References
- 6
- FWCI
- 4.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hysteresis Modeling of Wood Joints and Structural Systems. https://app.cochat.ai/papers/10.1061/(asce)0733-9445(1995)121:6(1013
- The paper
- Foliente, G. C. (1995). Hysteresis Modeling of Wood Joints and Structural Systems. Journal of Structural Engineering. https://doi.org/10.1061/(asce)0733-9445(1995)121%3A6(1013
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.