The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Structural Finite Element Model Updating Using Ambient Vibration Test Results
Abstract
This paper presents a practical and user-friendly finite element (FE) model updating technique for real structures using ambient vibration test results. The first case study of a simulated simply supported beam demonstrates a comparative study of the influence of different possible residuals in objective function. Frequency residual only, mode shape related function only, modal flexibility residual only, and their combinations are studied independently. In view of tuning as well as damage localization, full objective function that considers all three residuals is the best for FE updating. This objective function is implemented in a second case study of a real concrete-filled steel tubular arch bridge. The bridge was tested by ambient vibration measurements. Followed by the three-dimensional FE modeling of the bridge, an eigenvalue sensitivity study is carried out to see the most sensitive parameters to the concerned modes. FE model mass matrix obtained from Guyan reduction technique is used to the mass normalization of the mode shapes extracted from ambient modal test to calculate the modal flexibility. The updated FE model of the bridge is able to produce a sufficient improvement on modal parameters of the concerned modes which is in close agreement with the experimental results still preserving the physical meaning of updated parameters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Powell, M. J. D. (1964) · The Computer Journal · doi:10.1093/comjnl/7.2.155 · Cited by 4,632
Cited by
Finite element model updating in structural dynamics by using the response surface method
Ren, W.-X., & Chen, H.-B. (2010) · Engineering Structures · doi:10.1016/j.engstruct.2010.04.019 · Cited by 374
Self-citationReview of finite element model updating methods for structural applications
Ereiz, S., Duvnjak, I., & Fernando Jiménez-Alonso, J. (2022) · Structures · doi:10.1016/j.istruc.2022.05.041 · Cited by 371
Wang, Z., & Cha, Y.-J. (2021) · Structural Health Monitoring · doi:10.1177/1475921720934051 · Cited by 336
Alkayem, N. F., Cao, M., Zhang, Y., Bayat, M., & Su, Z. (2018) · Neural Computing and Applications · doi:10.1007/s00521-017-3284-1 · Cited by 262
Metadata
- Authors
- Jaishi, B., & Ren, W.-X.
- Venue
- Journal of Structural Engineering
- Published
- 2005-04
- Volume
- 131
- Issue
- 4
- Pages
- 617-628
- ISSN
- 0733-9445 (ISSN-L)
- 1943-541X
- DOI
- 10.1061/(asce)0733-9445(2005)131:4(617
- OpenAlex
- W2102962278
- Cited by
- 404
- References
- 1
- FWCI
- 46.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Structural Finite Element Model Updating Using Ambient Vibration Test Results. https://app.cochat.ai/papers/10.1061/(asce)0733-9445(2005)131:4(617
- The paper
- Jaishi, B., & Ren, W.-X. (2005). Structural Finite Element Model Updating Using Ambient Vibration Test Results. Journal of Structural Engineering. https://doi.org/10.1061/(asce)0733-9445(2005)131%3A4(617
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.