The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Behavior of High Strength Structural Steel at Elevated Temperatures
Abstract
This paper presents the mechanical properties of high strength structural steel and mild structural steel at elevated temperatures. Mechanical properties of structural steel at elevated temperatures are important for fire resistant design of steel structures. However, current design standards for fire resistance of steel structures are mainly based on the investigation of hot-rolled carbon steel with normal strength, such as mild steel. The performance of high strength steel at elevated temperatures is unknown. Hence, an experimental program has been carried out to investigate the mechanical properties of both high strength steel and mild steel at elevated temperatures. The high strength steel BISPLATE 80 (approximately equivalent to ASTM A 514, EN 10137-2 Grade S690Q, and JIS G 3128) and the mild steel XLERPLATE Grade 350 (approximately equivalent to ASTM 573-450) were tested using steady and transient-state test methods. The elastic moduli and yield strengths were obtained at different strain levels, and the ultimate strength and thermal elongation were evaluated at different temperatures. It is shown that the reduction factors of yield strength and elastic modulus of high strength steel and mild steel are quite similar for the temperature ranging from 22to540°C. The test results were compared with the predictions obtained from the American, Australian, British, and European standards.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
European Committee for Standardization
(2014) · Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik · doi:10.1007/978-3-642-41714-6_51763 · Cited by 3,300
Committee on Fire Protection (1992) · American Society of Civil Engineers eBooks · doi:10.1061/9780872628885 · Cited by 308
Development and use of high performance steel
Bjorhovde, R. (2003) · Journal of Constructional Steel Research · doi:10.1016/s0143-974x(03)00118-4 · Cited by 249
Cited by
Stress-Strain Curves of Structural and Reinforcing Steels after Exposure to Elevated Temperatures
Tao, Z., Wang, X.-Q., & Uy, B. (2013) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000676 · Cited by 425
Self-citationEnsemble classification method for structural damage assessment under varying temperature
Fallahian, M., Khoshnoudian, F., & Meruane, V. (2018) · Structural Health Monitoring · doi:10.1177/1475921717717311 · Cited by 60
Metadata
- Authors
- Chen, J., Young, B., & Uy, B.
- Venue
- Journal of Structural Engineering
- Published
- 2006-12
- Volume
- 132
- Issue
- 12
- Pages
- 1948-1954
- ISSN
- 0733-9445 (ISSN-L)
- 1943-541X
- DOI
- 10.1061/(asce)0733-9445(2006)132:12(1948
- OpenAlex
- W2054278683
- Cited by
- 363
- References
- 3
- FWCI
- 10.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Behavior of High Strength Structural Steel at Elevated Temperatures. https://app.cochat.ai/papers/10.1061/(asce)0733-9445(2006)132:12(1948
- The paper
- Chen, J., Young, B., & Uy, B. (2006). Behavior of High Strength Structural Steel at Elevated Temperatures. Journal of Structural Engineering. https://doi.org/10.1061/(asce)0733-9445(2006)132%3A12(1948
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.