The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Experimental Evaluation of a Large-Scale Buckling-Restrained Braced Frame
Abstract
As buckling-restrained braced frames (BRBFs) have been used increasingly in the United States, the need for knowledge about BRBF behavior has grown. In particular, large-scale experimental evaluations of BRBFs are necessary to demonstrate the seismic performance of the system. Although tests of buckling-restrained braces (BRBs) have demonstrated their ability to withstand significant ductility demands, large-scale BRBF tests have exhibited poor performance at story drifts between 0.02 and 0.025rad. These tests indicate that the large stiffness of the typical beam-column-brace connection detail leads to large flexural demands that cause undesirable failure modes. As part of a research program composed of numerical and experimental simulations, a large-scale BRBF with improved connection details was tested at the ATLSS Center, Lehigh University. During multiple earthquake simulations, which were conducted using a hybrid pseudodynamic testing method, the test frame sustained story drifts of close to 0.05rad and BRB maximum ductility demands of over 25 with minimal damage and no stiffness or strength degradation. The testing program demonstrated that a properly detailed BRBF can withstand severe seismic input and maintain its full load-carrying capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Minimum Design Loads for Buildings and Other Structures
American Society of Civil Engineers (2003) · American Society of Civil Engineers eBooks · doi:10.1061/9780784406243 · Cited by 3,879
The 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures
Holmes, W. T. (2000) · Earthquake Spectra · doi:10.1193/1.1586085 · Cited by 1,160
Minimum Design Loads for Buildings and Other Structures
American Society of Civil Engineers (2005) · American Society of Civil Engineers eBooks · doi:10.1061/9780784408094 · Cited by 884
Pseudodynamic Method for Seismic Testing
Mahin, S. A., & Shing, P. B. (1985) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(1985)111:7(1482 · Cited by 274
Cited by
Miller, D. J., Fahnestock, L. A., & Eatherton, M. R. (2012) · Engineering Structures · doi:10.1016/j.engstruct.2012.02.037 · Cited by 514
Self-citationPerformance-based seismic design of self-centering steel frames with SMA-based braces
Qiu, C.-X., & Zhu, S. (2017) · Engineering Structures · doi:10.1016/j.engstruct.2016.09.051 · Cited by 349
Yamamoto, M., & Sone, T. (2014) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.2438 · Cited by 45
Metadata
- Authors
- Fahnestock, L. A., Ricles, J. M., & Sause, R.
- Venue
- Journal of Structural Engineering
- Published
- 2007-09
- Volume
- 133
- Issue
- 9
- Pages
- 1205-1214
- ISSN
- 0733-9445 (ISSN-L)
- 1943-541X
- DOI
- 10.1061/(asce)0733-9445(2007)133:9(1205
- OpenAlex
- W2006180828
- Cited by
- 362
- References
- 4
- FWCI
- 24.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Experimental Evaluation of a Large-Scale Buckling-Restrained Braced Frame. https://app.cochat.ai/papers/10.1061/(asce)0733-9445(2007)133:9(1205
- The paper
- Fahnestock, L. A., Ricles, J. M., & Sause, R. (2007). Experimental Evaluation of a Large-Scale Buckling-Restrained Braced Frame. Journal of Structural Engineering. https://doi.org/10.1061/(asce)0733-9445(2007)133%3A9(1205
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.