The DOI matches its Crossref record.
Review of Mechanical Properties of HSC at Elevated Temperature
Abstract
A compilation of experimental results on the mechanical properties of concrete when exposed to rapid heating as in a fire are presented. Emphasis is placed on concretes with high original compressive strengths, that is, high-strength concretes (HSCs). The compiled test data were categorized by the test methods and the types of aggregate used and compared for behavioral differences. The comparison revealed distinct difference in mechanical properties of HSC and normal-strength concrete (NSC) in the range between room temperature and approximately 450°C. The differences narrowed at temperature above 450°C. Also presented is a comparison of these test results with existing code provisions on the effects of elevated temperature on concrete strength. It is shown that the Eurocode provisions and the Comités Euro-International Du Beton (CEB) design curves are more applicable to NSC than to HSC. In fact, these provisions are unsafe when compared with HSC test results. The study showed a lack of experimental data for lightweight HSC and HSC heated under a constant preload to simulate the stress conditions in HSC columns.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Poon, C.-S., Azhar, S., Anson, M., & Wong, Y.-L. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00580-4 · Cited by 521
Khaliq, W., & Kodur, V. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.06.012 · Cited by 354
Malik, M., Bhattacharyya, S. K., & Barai, S. V. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121398 · Cited by 259
Metadata
- Authors
- Phan, L. T., & Carino, N. J.
- Venue
- Journal of Materials in Civil Engineering
- Published
- 1998-02
- Volume
- 10
- Issue
- 1
- Pages
- 58-65
- ISSN
- 0899-1561 (ISSN-L)
- 1943-5533
- DOI
- 10.1061/(asce)0899-1561(1998)10:1(58
- OpenAlex
- W2058614510
- Cited by
- 263
- References
- 0
- FWCI
- 6.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Review of Mechanical Properties of HSC at Elevated Temperature. https://app.cochat.ai/papers/10.1061/(asce)0899-1561(1998)10:1(58
- The paper
- Phan, L. T., & Carino, N. J. (1998). Review of Mechanical Properties of HSC at Elevated Temperature. Journal of Materials in Civil Engineering. https://doi.org/10.1061/(asce)0899-1561(1998)10%3A1(58
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.