The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Effect of Fly Ash on Engineering Properties of Expansive Soils
Abstract
This note presents a study of the efficacy of fly ash as an additive in improving the engineering characteristics of expansive soils. An experimental program has evaluated the effect of the fly ash content on the free swell index, swell potential, swelling pressure, plasticity, compaction, strength, and hydraulic conductivity characteristics of expansive soil. The plasticity, hydraulic conductivity and swelling properties of the blends decreased and the dry unit weight and strength increased with an increase in fly ash content. The resistance to penetration of the blends increased significantly with an increase in fly ash content for a given water content. Excellent correlation was obtained between the measured and predicted undrained shear strengths.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Engineering Properties of Expansive Clays
Holtz, W. G., & Gibbs, H. J. (1956) · Transactions of the American Society of Civil Engineers · doi:10.1061/taceat.0007325 · Cited by 610
Foundations on Expansive Soils
(1975) · Developments in Geotechnical Engineering · doi:10.1016/b978-0-444-41393-2.x5001-7 · Cited by 586
Use of Class C Fly Ashes for the Stabilizationof an Expansive Soil
Çokça, E. (2001) · Journal of Geotechnical and Geoenvironmental Engineering · doi:10.1061/(asce)1090-0241(2001)127:7(568 · Cited by 466
Cited by
Fundamentals of soil stabilization
Firoozi, A. A., Guney Olgun, C., Firoozi, A. A., & Baghini, M. S. (2017) · International Journal of Geo-Engineering · doi:10.1186/s40703-017-0064-9 · Cited by 678
Stabilization of expansive soils using chemical additives: A review
Barman, D., & Dash, S. K. (2022) · Journal of Rock Mechanics and Geotechnical Engineering · doi:10.1016/j.jrmge.2022.02.011 · Cited by 418
Ground granulated blast furnace slag amended fly ash as an expansive soil stabilizer
Sharma, A. K., & Sivapullaiah, P. V. (2016) · Soils and Foundations · doi:10.1016/j.sandf.2016.02.004 · Cited by 400
Behnood, A. (2018) · Transportation Geotechnics · doi:10.1016/j.trgeo.2018.08.002 · Cited by 390
Stabilization of a Clayey Soil with Fly Ash and Lime: A Micro Level Investigation
Sharma, N. K., Swain, S. K., & Sahoo, U. C. (2012) · Geotechnical and Geological Engineering · doi:10.1007/s10706-012-9532-3 · Cited by 287
Metadata
- Authors
- Phani Kumar, B. R., & Sharma, R. S.
- Venue
- Journal of Geotechnical and Geoenvironmental Engineering
- Published
- 2004-07
- Volume
- 130
- Issue
- 7
- Pages
- 764-767
- ISSN
- 1090-0241 (ISSN-L)
- 1943-5606
- DOI
- 10.1061/(asce)1090-0241(2004)130:7(764
- OpenAlex
- W2134300909
- Cited by
- 448
- References
- 3
- FWCI
- 16.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.