The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Supported Excavations: Observational Method and Inverse Modeling
Abstract
An inverse analysis procedure that uses construction monitoring data to update predictions of deformations for supported excavation systems is presented. The numerical procedure is used to optimize the finite element model of a 12.2-m-deep excavation through Chicago glacial clays by minimizing the errors between monitoring data and computed displacements. The field observations are obtained from inclinometer data that measured lateral movements of the soil behind the supporting walls on opposite sides of the excavation throughout construction. Five construction stages are defined for the inverse analysis. At every new construction stage, the inclinometer data relative to that stage are added to the observations already available to “recalibrate” the model of the excavation. The constitutive responses of the soils are represented by the hardening-soil (H-S) model. Of the six basic H-S input parameters, only one parameter per layer is optimized, while the other parameters are either kept constant or related to the updated value of the optimized parameter. The methodology is effectively used to recalibrate the model of the excavation at early construction stages, such that good “predictions” are made of the behavior of the soil at later stages.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Algorithm for Least-Squares Estimation of Nonlinear Parameters
Marquardt, D. W. (1963) · Journal of the Society for Industrial and Applied Mathematics · doi:10.1137/0111030 · Cited by 30,728
Cited by
Yin, Z., Jin, Y., Shen, J. S., & Hicher, P. (2018) · International Journal for Numerical and Analytical Methods in Geomechanics · doi:10.1002/nag.2714 · Cited by 282
Metadata
- Authors
- Finno, R. J., & Calvello, M.
- Venue
- Journal of Geotechnical and Geoenvironmental Engineering
- Published
- 2005-07
- Volume
- 131
- Issue
- 7
- Pages
- 826-836
- ISSN
- 1090-0241 (ISSN-L)
- 1943-5606
- DOI
- 10.1061/(asce)1090-0241(2005)131:7(826
- OpenAlex
- W2169704879
- Cited by
- 238
- References
- 1
- FWCI
- 35.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Supported Excavations: Observational Method and Inverse Modeling. https://app.cochat.ai/papers/10.1061/(asce)1090-0241(2005)131:7(826
- The paper
- Finno, R. J., & Calvello, M. (2005). Supported Excavations: Observational Method and Inverse Modeling. Journal of Geotechnical and Geoenvironmental Engineering. https://doi.org/10.1061/(asce)1090-0241(2005)131%3A7(826
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.