The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Development of the Nonlinear Bond Stress–Slip Model of Fiber Reinforced Plastics Sheet–Concrete Interfaces with a Simple Method
Open accessAbstract
A new analytical method for defining the nonlinear bond stress–slip models of fiber reinforced plastics (FRP) sheet–concrete interfaces through pullout bond test is proposed. With this method, it is not necessary to attach many strain gauges on the FRP sheets for obtaining the strain distributions in FRP as well as the local bond stresses and slips. Instead, the local interfacial bond stress-slip models can be simply derived from the relationships between the pullout forces and loaded end slips. Based on a series of pullout tests, the bond stress–slip models of FRP sheet–concrete interfaces, in which different FRP stiffness, FRP materials (carbon FRP, aramid FRP, and glass FRP), and adhesives are used, have been derived. Only two parameters, the interfacial fracture energy and interfacial ductility index, which can take into account the effects of all interfacial components, are necessary in these models. Comparisons between analytical results and experimental ones show good accordance, indicating the reliability of the proposed method and the proposed bond stress–slip models.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Anchorage Strength Models for FRP and Steel Plates Bonded to Concrete
Chen, J. F., & Teng, J. G. (2001) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(2001)127:7(784 · Cited by 1,235
Bond Behavior between Fiber-Reinforced Polymer Laminates and Concrete
(2001) · ACI Structural Journal · doi:10.14359/10224 · Cited by 531
Cited by
Pressure-dependent bond stress-slip model for sand-coated FRP-concrete interface
Lin, H., Feng, P., & Yang, J.-Q. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.113719 · Cited by 25
Metadata
- Authors
- Dai, J., Ueda, T., & Sato, Y.
- Venue
- Journal of Composites for Construction
- Published
- 2005-02
- Volume
- 9
- Issue
- 1
- Pages
- 52-62
- ISSN
- 1090-0268 (ISSN-L)
- 1943-5614
- DOI
- 10.1061/(asce)1090-0268(2005)9:1(52
- OpenAlex
- W2142588602
- Cited by
- 680
- References
- 2
- FWCI
- 32.53
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development of the Nonlinear Bond Stress–Slip Model of Fiber Reinforced Plastics Sheet–Concrete Interfaces with a Simple Method. https://app.cochat.ai/papers/10.1061/(asce)1090-0268(2005)9:1(52
- The paper
- Dai, J., Ueda, T., & Sato, Y. (2005). Development of the Nonlinear Bond Stress–Slip Model of Fiber Reinforced Plastics Sheet–Concrete Interfaces with a Simple Method. Journal of Composites for Construction. https://doi.org/10.1061/(asce)1090-0268(2005)9%3A1(52
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.