The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
Risk Assessment of Work-Related Musculoskeletal Disorders in Construction: State-of-the-Art Review
Abstract
Work-related musculoskeletal disorders (WMSDs) have long been a primary cause of non-fatal injuries in construction. They involve sudden or continuous stresses on a worker’s musculoskeletal system (e.g., muscles, tendons, ligaments, bones) and may impair the ability of the worker to perform his or her job, or even cause permanent disability. Although assessing exposure to risk factors of WMSDs has proven to be feasible to alleviate the incidence rate of this injury, the field remains underdeveloped because of a lack of knowledge among construction professionals regarding the enabling techniques and their performance and limits. This paper reviews the available techniques for WMSD risk assessments, summarizes their benefits and limitations, and identifies areas in which further studies are still needed. Current techniques are categorized into self-report, observation, direct measurement, and remote sensing assessment. Particular interests are revealed in the wearable-sensor and vision-based techniques within the construction community. This review helps the industry to better understand the severity of WMSDs and the related risks in construction. This review also provides the construction research community with a holistic view on available techniques, their limitations, and the need for research in achieving automatic assessments on construction sites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Standardised Nordic questionnaires for the analysis of musculoskeletal symptoms
Kuorinka, I., Jonsson, B., Kilbom, A., Vinterberg, H., Biering-Sørensen, F., Andersson, G., & Jørgensen, K. (1987) · Applied Ergonomics · doi:10.1016/0003-6870(87)90010-x · Cited by 5,103
OpenSim: Open-Source Software to Create and Analyze Dynamic Simulations of Movement
Delp, S. L., Anderson, F. C., Arnold, A. S., Loan, P., Habib, A., John, C. T., Guendelman, E., & Thelen, D. G. (2007) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2007.901024 · Cited by 4,933
Perceived exertion as an indicator of somatic stress
Borg, G. (1970) · Journal of Rehabilitation Medicine · doi:10.2340/1650197719702239298 · Cited by 4,707
RULA: a survey method for the investigation of work-related upper limb disorders
McAtamney, L., & Nigel Corlett, E. (1993) · Applied Ergonomics · doi:10.1016/0003-6870(93)90080-s · Cited by 3,361
A stretchable carbon nanotube strain sensor for human-motion detection
Yamada, T., Hayamizu, Y., Yamamoto, Y., Yomogida, Y., Izadi-Najafabadi, A., Futaba, D. N., & Hata, K. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.36 · Cited by 3,247
A survey of advances in vision-based human motion capture and analysis
Moeslund, T. B., Hilton, A., & Krüger, V. (2006) · Computer Vision and Image Understanding · doi:10.1016/j.cviu.2006.08.002 · Cited by 2,541
Rapid entire body assessment (REBA)
Hignett, S., & McAtamney, L. (2000) · Applied Ergonomics · doi:10.1016/s0003-6870(99)00039-3 · Cited by 2,260
Revised NIOSH equation for the design and evaluation of manual lifting tasks
WATERS, T. R., PUTZ-ANDERSON, V., GARG, A., & FINE, L. J. (1993) · Ergonomics · doi:10.1080/00140139308967940 · Cited by 2,042
Correcting working postures in industry: A practical method for analysis
Karhu, O., Kansi, P., & Kuorinka, I. (1977) · Applied Ergonomics · doi:10.1016/0003-6870(77)90164-8 · Cited by 1,348
An EMG-driven musculoskeletal model to estimate muscle forces and knee joint moments in vivo
Lloyd, D. G., & Besier, T. F. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00010-1 · Cited by 1,199
Cited by
Ding, L., Fang, W., Luo, H., Love, P. E. D., Zhong, B., & Ouyang, X. (2018) · Automation in Construction · doi:10.1016/j.autcon.2017.11.002 · Cited by 477
Falls from heights: A computer vision-based approach for safety harness detection
Fang, W., Ding, L., Luo, H., & Love, P. E. D. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.02.018 · Cited by 450
Computer vision techniques in construction: A critical review
Xu, S., Wang, J., Shou, W., Ngo, T., Sadick, A.-M., & Wang, X. (2021) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-020-09504-3 · Cited by 409
A versatile knee exoskeleton mitigates quadriceps fatigue in lifting, lowering, and carrying tasks
Divekar, N. V., Thomas, G. C., Yerva, A. R., Frame, H. B., & Gregg, R. D. (2024) · Science Robotics · doi:10.1126/scirobotics.adr8282 · Cited by 52
Ojha, A., Gautam, Y., Jebelli, H., & Akanmu, A. (2024) · Automation in Construction · doi:10.1016/j.autcon.2024.105742 · Cited by 39
Metadata
- Authors
- Wang, D., Dai, F., & Ning, X.
- Venue
- Journal of Construction Engineering and Management
- Published
- 2015-06
- Volume
- 141
- Issue
- 6
- ISSN
- 0733-9364 (ISSN-L)
- 1943-7862
- OpenAlex
- W2082219790
- Cited by
- 274
- References
- 63
- FWCI
- 33.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Risk Assessment of Work-Related Musculoskeletal Disorders in Construction: State-of-the-Art Review. https://app.cochat.ai/papers/10.1061/(asce)co.1943-7862.0000979
- The paper
- Wang, D., Dai, F., & Ning, X. (2015). Risk Assessment of Work-Related Musculoskeletal Disorders in Construction: State-of-the-Art Review. Journal of Construction Engineering and Management. https://doi.org/10.1061/(asce)co.1943-7862.0000979
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.