The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
RFID-Based Real-Time Locating System for Construction Safety Management
Abstract
This paper presents the development of a radiofrequency identification (RFID)–based real-time locating system (RTLS) for safety management. The particular focus of this paper is the creation of the RTLS, which provides accurate and robust localization performance in construction sites where it is otherwise very difficult to maintain signal availability because of many (moving) obstacles. Adopted were the Time of arrival method as a localization method, the Chirp spread spectrum as a wireless networking technology, and the Assistant Tag as a way to maintain enough signal availability for effective communication. In addition, the developed RTLS uses RFID to retain the latter’s benefits (e.g., data storage, transfer capability, relatively inexpensive installation cost). To demonstrate the RTLS’s localization performance, two case studies have been conducted; the results show great potential for use in improving construction site safety management.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
RADAR: an in-building RF-based user location and tracking system
Bahl, P., & Padmanabhan, V. N. (2002) · Proceedings IEEE INFOCOM 2000. Conference on Computer Communications. Nineteenth Annual Joint Conference of the IEEE Computer and Communications Societies (Cat. No.00CH37064) · doi:10.1109/infcom.2000.832252 · Cited by 8,380
Cited by
Awolusi, I., Marks, E., & Hallowell, M. (2018) · Automation in Construction · doi:10.1016/j.autcon.2017.10.010 · Cited by 496
Chi, H.-L., Kang, S.-C., & Wang, X. (2013) · Automation in Construction · doi:10.1016/j.autcon.2012.12.017 · Cited by 476
Proactive behavior-based safety management for construction safety improvement
Li, H., Lu, M., Hsu, S.-C., Gray, M., & Huang, T. (2015) · Safety Science · doi:10.1016/j.ssci.2015.01.013 · Cited by 397
A system dynamics approach for modeling construction workers’ safety attitudes and behaviors
Shin, M., Lee, H.-S., Park, M., Moon, M., & Han, S. (2014) · Accident Analysis & Prevention · doi:10.1016/j.aap.2013.09.019 · Cited by 307
Self-citationA science mapping approach based review of construction safety research
Jin, R., Zou, P. X. W., Piroozfar, P., Wood, H., Yang, Y., Yan, L., & Han, Y. (2019) · Safety Science · doi:10.1016/j.ssci.2018.12.006 · Cited by 270
Metadata
- Authors
- Lee, H.-S., Lee, K.-P., Park, M., Baek, Y., & Lee, S.
- Venue
- Journal of Computing in Civil Engineering
- Published
- 2012-05
- Volume
- 26
- Issue
- 3
- Pages
- 366-377
- ISSN
- 0887-3801 (ISSN-L)
- 1943-5487
- OpenAlex
- W2004846622
- Cited by
- 191
- References
- 1
- FWCI
- 5.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: RFID-Based Real-Time Locating System for Construction Safety Management. https://app.cochat.ai/papers/10.1061/(asce)cp.1943-5487.0000144
- The paper
- Lee, H.-S., Lee, K.-P., Park, M., Baek, Y., & Lee, S. (2012). RFID-Based Real-Time Locating System for Construction Safety Management. Journal of Computing in Civil Engineering. https://doi.org/10.1061/(asce)cp.1943-5487.0000144
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.