The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Anisotropic Critical State Theory: Role of Fabric
Open accessAbstract
An Anisotropic Critical State Theory (ACST) for granular media is presented, which accounts for the role of anisotropic fabric at critical state. It enhances the requirements of critical values for the stress and void ratio of the classical Critical State Theory (CST) by an additional requirement of critical value for an appropriate measure of fabric-anisotropy. A fabric tensor and its evolution toward a critical value, norm-wise and direction-wise, is introduced motivated by micromechanical and experimental studies. On the basis of a scalar-valued fabric-anisotropy variable relating the evolving fabric tensor to the loading direction, a dilatancy state line is defined in the void ratio—pressure plane which determines a dilatancy state parameter ζ that characterizes the contracting or dilating trends of the current state. When the fabric-anisotropy variable reaches its critical state value, the dilatancy state line becomes identical to the critical state line and the ζ identical to the well-known state parameter ψ. An immediate corollary is the uniqueness of the critical state line, for which a thermodynamic proof is provided on the basis of the Gibbs condition. Static liquefaction is obtained when ζ=0 with the stress ratio reaching its critical value but not the void ratio and the fabric. Simulations of anisotropic material response by a triaxial model are used to illustrate the effectiveness of the novel ACST.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Foundations of solid mechanics
Fung, Y. C. (1965) · Medical Entomology and Zoology · Cited by 2,002
Foundations of solid mechanics
Pohle, F. V. (1966) · Journal of the Franklin Institute · doi:10.1016/0016-0032(66)90243-2 · Cited by 1,950
RICE, J. R. (1971) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(71)90010-x · Cited by 1,810
The stress-dilatancy relation for static equilibrium of an assembly of particles in contact
Rowe, P. W. (1962) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1962.0193 · Cited by 1,644
Initial Fabrics and their Relations to Mechanical Properties of Granular Material
Oda, M. (1972) · Soils and Foundations · doi:10.3208/sandf1960.12.17 · Cited by 862
Application of thermomechanical principles to the modelling of geotechnical materials
Collins, I. F., & Houlsby, G. T. (1997) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.1997.0107 · Cited by 505
The Mechanism of Fabric Changes During Compressional Deformation of Sand
Oda, M. (1972) · SOILS AND FOUNDATIONS · doi:10.3208/sandf1972.12.1 · Cited by 402
Wang, C. C. (1970) · Archive for Rational Mechanics and Analysis · doi:10.1007/bf00272241 · Cited by 384
The Steady State of Deformation
Poulos, S. J. (1981) · Journal of the Geotechnical Engineering Division · doi:10.1061/ajgeb6.0001129 · Cited by 369
Metadata
- Authors
- Li, X. S., & Dafalias, Y. F.
- Venue
- Journal of Engineering Mechanics
- Published
- 2012-03
- Volume
- 138
- Issue
- 3
- Pages
- 263-275
- ISSN
- 0733-9399 (ISSN-L)
- 1943-7889
- OpenAlex
- W2118068135
- Cited by
- 505
- References
- 13
- FWCI
- 31.43
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Anisotropic Critical State Theory: Role of Fabric. https://app.cochat.ai/papers/10.1061/(asce)em.1943-7889.0000324
- The paper
- Li, X. S., & Dafalias, Y. F. (2012). Anisotropic Critical State Theory: Role of Fabric. Journal of Engineering Mechanics. https://doi.org/10.1061/(asce)em.1943-7889.0000324
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.