The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Effect of Particle Shape on Stress-Dilatancy Responses of Medium-Dense Sands
Open accessAbstract
The effect of particle shape on the strength, dilatancy, and stress-dilatancy relationship was systematically investigated through a series of drained triaxial compression tests on sands mixed with angular and rounded glass beads of different proportions (0%, 25%, 50%, 75%, and 100%). A distinct overall regularity parameter was used to define the particle shape of these mixtures, which ranged from 0.844 to 0.971. The test results showed that all of the samples at an initial relative density of 0.6 exhibited strain-softening and volume-expansion behavior. It was found that the peak-state deviatoric stress, peak-state axial strain, and peak-state friction angle at a given confining pressure decreased with increasing overall regularity. The maximum differences in the peak-state deviator stress, peak-state axial strain, peak-state friction angle, excess friction angle, and maximum dilation angle due to changes in particle shape could be as much as 0.61 MPa, 5.4%, 8.6, 1.5, and 3° at a given confining pressure of 0.4 MPa. In addition, it was found that the slope of the relationship between the peak-state friction angle and maximum dilation angle was independent of the particle shape, whereas the intercept (i.e., the critical-state friction angle) was significantly influenced by the particle shape. A stress-dilatancy equation incorporating the effect of overall regularity was proposed and provided a good estimate of the observed response accounting for the different particle shapes investigated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
NIH Image to ImageJ: 25 years of image analysis
Schneider, C. A., Rasband, W. S., & Eliceiri, K. W. (2012) · Nature Methods · doi:10.1038/nmeth.2089 · Cited by 64,638
The strength and dilatancy of sands
Bolton, M. D. (1986) · Géotechnique · doi:10.1680/geot.1986.36.1.65 · Cited by 2,730
Volume, Shape, and Roundness of Rock Particles
Wadell, H. (1932) · The Journal of Geology · doi:10.1086/623964 · Cited by 1,413
Non-invasive characterization of particle morphology of natural sands
Fonseca, J., O’Sullivan, C., Coop, M. R., & Lee, P. D. (2012) · Soils and Foundations · doi:10.1016/j.sandf.2012.07.011 · Cited by 352
Particle size measurement: the equivalent spherical diameter
Jennings, B. R., & Parslow, K. (1988) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1988.0100 · Cited by 261
Undrained Shear Strength of Granular Soils with Different Particle Gradations
Kokusho, T., Hara, T., & Hiraoka, R. (2004) · Journal of Geotechnical and Geoenvironmental Engineering · doi:10.1061/(asce)1090-0241(2004)130:6(621 · Cited by 220
Ovalle, C., Frossard, E., Dano, C., Hu, W., Maiolino, S., & Hicher, P.-Y. (2014) · Acta Mechanica · doi:10.1007/s00707-014-1127-z · Cited by 192
Rockfill shear strength evaluation: a rational method based on size effects
FROSSARD, E., HU, W., DANO, C., & HICHER, P.-Y. (2012) · Géotechnique · doi:10.1680/geot.10.p.079 · Cited by 189
Zhang, Y., Buscarnera, G., & Einav, I. (2015) · Géotechnique · doi:10.1680/jgeot.15.p.119 · Cited by 134
Ovalle, C., Dano, C., Hicher, P., & Cisternas, M. (2014) · Canadian Geotechnical Journal · doi:10.1139/cgj-2014-0079 · Cited by 121
Cited by
Ulusoy, U. (2023) · Minerals · doi:10.3390/min13010091 · Cited by 334
Metadata
- Authors
- Xiao, Y., Long, L., Matthew Evans, T., Zhou, H., Liu, H., & Stuedlein, A. W.
- Venue
- Journal of Geotechnical and Geoenvironmental Engineering
- Published
- 2019-02
- Volume
- 145
- Issue
- 2
- ISSN
- 1090-0241 (ISSN-L)
- 1943-5606
- OpenAlex
- W2901554737
- Cited by
- 355
- References
- 11
- FWCI
- 26.94
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Particle Shape on Stress-Dilatancy Responses of Medium-Dense Sands. https://app.cochat.ai/papers/10.1061/(asce)gt.1943-5606.0001994
- The paper
- Xiao, Y., Long, L., Matthew Evans, T., Zhou, H., Liu, H., & Stuedlein, A. W. (2019). Effect of Particle Shape on Stress-Dilatancy Responses of Medium-Dense Sands. Journal of Geotechnical and Geoenvironmental Engineering. https://doi.org/10.1061/(asce)gt.1943-5606.0001994
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.