The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Comparative Life Cycle Assessment of Conventional, Glass Powder, and Alkali-Activated Slag Concrete and Mortar
Abstract
This study compares the cradle-to-gate greenhouse gas emissions (GHGs), energy use, water use, and potential environmental toxicity of conventional (Conv), glass powder (GP), and alkali-activated slag (AAS) concrete and mortar. The comparison is based on 1 m3 of concrete/mortar with similar 28-day compressive strength, so the same concrete/mortar member with same dimensions may be manufactured from Conv, GP, or AAS materials and used for same applications. The result shows that compared to a 35-MPa Conv concrete, a 35-MPa GP concrete has, on average, 19% lower GHGs, 17% less energy, 14% less water, and 14–21% lower environmental toxicity. A 35-MPa AAS concrete has 73% lower GHGs, 43% less energy, 25% less water, and 22–94% lower effects for all environmental toxicity categories except an 72% higher ecotoxicity effect. Environmental impact reductions are also found for using GP as a cement replacement in concrete with lower strengths and replacing cement with GP or AAS in mortars with different strengths. The paper concludes that using alternative cementitious materials GP and AAS as cement replacements could significantly reduce the environmental impacts of cement-based products.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rebitzer, G., Ekvall, T., Frischknecht, R., Hunkeler, D., Norris, G., Rydberg, T., Schmidt, W.-P., Suh, S., Weidema, B. P., & Pennington, D. W. (2004) · Environment International · doi:10.1016/j.envint.2003.11.005 · Cited by 2,753
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
TRACI 2.0: the tool for the reduction and assessment of chemical and other environmental impacts 2.0
Bare, J. (2011) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-010-0338-9 · Cited by 988
Green house gas emissions due to concrete manufacture
Flower, D. J. M., & Sanjayan, J. G. (2007) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2007.05.327 · Cited by 912
Cited by
Shrinkage mechanisms of alkali-activated slag
Ye, H., & Radlińska, A. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.07.001 · Cited by 469
Xiao, R., Ma, Y., Jiang, X., Zhang, M., Zhang, Y., Wang, Y., Huang, B., & He, Q. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119610 · Cited by 359
Aiken, T. A., Kwasny, J., Sha, W., & Soutsos, M. N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.06.011 · Cited by 338
Understanding the drying shrinkage performance of alkali-activated slag mortars
Ye, H., Cartwright, C., Rajabipour, F., & Radlińska, A. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.11.010 · Cited by 287
Self-citationTong, K. T., Vinai, R., & Soutsos, M. N. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.025 · Cited by 261
Metadata
- Authors
- Jiang, M., Chen, X., Rajabipour, F., & Hendrickson, C. T.
- Venue
- Journal of Infrastructure Systems
- Published
- 2014-12
- Volume
- 20
- Issue
- 4
- ISSN
- 1076-0342 (ISSN-L)
- 1943-555X
- OpenAlex
- W1980279322
- Cited by
- 203
- References
- 4
- FWCI
- 14.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comparative Life Cycle Assessment of Conventional, Glass Powder, and Alkali-Activated Slag Concrete and Mortar. https://app.cochat.ai/papers/10.1061/(asce)is.1943-555x.0000211
- The paper
- Jiang, M., Chen, X., Rajabipour, F., & Hendrickson, C. T. (2014). Comparative Life Cycle Assessment of Conventional, Glass Powder, and Alkali-Activated Slag Concrete and Mortar. Journal of Infrastructure Systems. https://doi.org/10.1061/(asce)is.1943-555x.0000211
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.