The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Effect of Fly Ash and PVA Fiber on Microstructural Damage and Residual Properties of Engineered Cementitious Composites Exposed to High Temperatures
Abstract
This paper discusses the influence of high volumes of fly ash and micro polyvinyl alcohol (PVA) fibers on the fire resistance and microstructure of engineered cementitious composites (ECC). Composites containing two different contents of fly ash as a replacement for cement (55 and 70% by weight of total cementitious materials) are examined. To determine the effects of microfibers and ultrahigh ductility of ECC, ECC matrix mixtures of similar composition except PVA fiber are also produced and tested for the fire resistance. The mixtures are exposed to temperatures up to 800°C for one hour. Fire resistances of the mixtures are then quantified in terms of the residual mechanical properties (strength, stress-strain curve, deflection, and stiffness) and mass loss. The role of PVA fibers and fly ash is discussed through the analysis of microstructure and fiber-matrix interactions as a function of heat treatment. The microstructural characterization is examined before and after exposure to fire deterioration by using scanning electron microscopy and the pore size distribution is obtained by mercury intrusion porosimetry. Results indicate that adding micro PVA fiber to the ECC matrix substantially improves the fire resistance and eliminates the explosive spalling behaviors of the ECC matrix. Fire resistance of ECC mixtures is further improved with the increase of fly ash content.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Spalling and pore pressure in HPC at high temperatures
Kalifa, P., Menneteau, F.-D., & Quenard, D. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00384-7 · Cited by 700
Compressive strength of concrete at high temperatures: a reassessment
Khoury, G. A. (1992) · Magazine of Concrete Research · doi:10.1680/macr.1992.44.161.291 · Cited by 602
(1938) · Nature · doi:10.1038/142487a0 · Cited by 466
Poon, C. S., Shui, Z. H., & Lam, L. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.02.011 · Cited by 455
Effect of Fly Ash and Silica Fume on Compressive and Fracture Behaviors of Concrete
Lam, L., Wong, Y. L., & Poon, C. S. (1998) · Cement and Concrete Research · doi:10.1016/s0008-8846(97)00269-x · Cited by 329
Chan, Y. N., Luo, X., & Sun, W. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00240-9 · Cited by 327
Performance of metakaolin concrete at elevated temperatures
Poon, C.-S., Azhar, S., Anson, M., & Wong, Y.-L. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(01)00061-0 · Cited by 275
Impact of high temperature on PFA concrete
Xu, Y., Wong, Y. L., Poon, C. S., & Anson, M. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00513-0 · Cited by 239
Fire performance of high-strength concrete: a report of the state-of-the-art
Phan, L. T. (1996) · doi:10.6028/nist.ir.5934 · Cited by 191
Changes of pore structure of cement mortars due to temperature
Rostásy, F. S., Weiβ, R., & Wiedemann, G. (1980) · Cement and Concrete Research · doi:10.1016/0008-8846(80)90072-1 · Cited by 186
Cited by
Influence of palm oil ash and palm oil clinker on the properties of lightweight concrete
Bayagoob, K. H., Zeyad, A. M., Amin, M., Agwa, I. S., & Abd-Elrahman, M. H. (2024) · REVIEWS ON ADVANCED MATERIALS SCIENCE · doi:10.1515/rams-2024-0079 · Cited by 6
Metadata
- Authors
- Şahmaran, M., Özbay, E., Yücel, H. E., Lachemi, M., & Li, V. C.
- Venue
- Journal of Materials in Civil Engineering
- Published
- 2011-12
- Volume
- 23
- Issue
- 12
- Pages
- 1735-1745
- ISSN
- 0899-1561 (ISSN-L)
- 1943-5533
- OpenAlex
- W2075638165
- Cited by
- 252
- References
- 14
- FWCI
- 8.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Fly Ash and PVA Fiber on Microstructural Damage and Residual Properties of Engineered Cementitious Composites Exposed to High Temperatures. https://app.cochat.ai/papers/10.1061/(asce)mt.1943-5533.0000335
- The paper
- Şahmaran, M., Özbay, E., Yücel, H. E., Lachemi, M., & Li, V. C. (2011). Effect of Fly Ash and PVA Fiber on Microstructural Damage and Residual Properties of Engineered Cementitious Composites Exposed to High Temperatures. Journal of Materials in Civil Engineering. https://doi.org/10.1061/(asce)mt.1943-5533.0000335
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.