The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Effect of Hybrid Fibers on Fresh Properties, Mechanical Properties, and Autogenous Shrinkage of Cost-Effective UHPC
Abstract
This paper investigates the effects of hybrid micro-macro steel and micro steel blended with synthetic fibers and of the fiber content on key properties of a cost-effective ultrahigh-performance concrete (UHPC). Eleven mixtures are prepared using three types of fibers: micro steel straight fibers (SF), macro steel hooked-end fibers (HF), and polyvinyl alcohol (PVA) fibers. The fiber content of SF is increased from 0 to 5%. At a fiber content of 2%, different combinations of micro-macro steel and micro steel-PVA fibers are considered. The minislump flow of all mixtures is fixed to 280±10 mm by adjusting the high-range water reducer (HRWR) dosage to ensure self-consolidating characteristics. The investigated properties include the HRWR demand, plastic viscosity, compressive strengths, tensile and flexural properties, and autogenous shrinkage. The plastic viscosity increases with the steel fiber content. At a fiber content of 2%, increasing the content of PVA or HF increases the plastic viscosity. Compared with the reference UHPC mixture made with 2% SF, the incorporation of 1% SF and 1% HF increases the flexural strength, toughness, and tensile strength by approximately 25, 30, and 20%, respectively, and reduces the autogenous shrinkage by 25%. The addition of 1.5% SF and 0.5% PVA increases the flexural strength and toughness by 10 and 15%, respectively, and decreases autogenous shrinkage by 40%. Increasing the SF content from 2 to 5% does not significantly improve the flexural properties, but notably reduces autogenous shrinkage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review
Yoo, D.-Y., & Banthia, N. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.08.001 · Cited by 1,008
Tensile behavior of Ultra High Performance Hybrid Fiber Reinforced Concrete
Park, S. H., Kim, D. J., Ryu, G. S., & Koh, K. T. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.09.009 · Cited by 751
162-TDF, R. T. (2003) · Materials and Structures · doi:10.1617/14007 · Cited by 750
Strain-hardening UHP-FRC with low fiber contents
Wille, K., Kim, D. J., & Naaman, A. E. (2011) · Materials and Structures · doi:10.1617/s11527-010-9650-4 · Cited by 510
Yoo, D.-Y., Lee, J.-H., & Yoon, Y.-S. (2013) · Composite Structures · doi:10.1016/j.compstruct.2013.07.033 · Cited by 482
Meng, W., & Khayat, K. H. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.09.069 · Cited by 397
Self-citation162-TDF, R. T. (2002) · Materials and Structures · doi:10.1617/13884 · Cited by 387
Hannawi, K., Bian, H., Prince-Agbodjan, W., & Raghavan, B. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.09.059 · Cited by 369
Optimization and performance of cost-effective ultra-high performance concrete
Meng, W., Valipour, M., & Khayat, K. H. (2017) · Materials and Structures · doi:10.1617/s11527-016-0896-3 · Cited by 342
Self-citationSun, W., Chen, H., Luo, X., & Qian, H. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00479-8 · Cited by 323
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Self-citationReview of ultra-high performance concrete and its application in bridge engineering
Xue, J., Briseghella, B., Huang, F., Nuti, C., Tabatabai, H., & Chen, B. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119844 · Cited by 471
Mitigation techniques for autogenous shrinkage of ultra-high-performance concrete – A review
Yang, L., Shi, C., & Wu, Z. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107456 · Cited by 367
Utilization of fibers in ultra-high performance concrete: A review
Gong, J., Ma, Y., Fu, J., Hu, J., Ouyang, X., Zhang, Z., & Wang, H. (2022) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.109995 · Cited by 360
Metadata
- Authors
- Meng, W., & Khayat, K. H.
- Venue
- Journal of Materials in Civil Engineering
- Published
- 2018-04
- Volume
- 30
- Issue
- 4
- ISSN
- 0899-1561 (ISSN-L)
- 1943-5533
- OpenAlex
- W2790849432
- Cited by
- 314
- References
- 19
- FWCI
- 13.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Hybrid Fibers on Fresh Properties, Mechanical Properties, and Autogenous Shrinkage of Cost-Effective UHPC. https://app.cochat.ai/papers/10.1061/(asce)mt.1943-5533.0002212
- The paper
- Meng, W., & Khayat, K. H. (2018). Effect of Hybrid Fibers on Fresh Properties, Mechanical Properties, and Autogenous Shrinkage of Cost-Effective UHPC. Journal of Materials in Civil Engineering. https://doi.org/10.1061/(asce)mt.1943-5533.0002212
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.