The DOI matches its Crossref record.
Mechanical Properties of Nanocomposite Cement Incorporating Surface-Treated and Untreated Carbon Nanotubes and Carbon Nanofibers
Open accessAbstract
To study the effects of functionalized carbon nanotubes (CNTs) and carbon nanofibers (CNFs) on the mechanical properties of cement composites, both untreated and treated CNFs and CNTs were added to cement paste in concentrations of 0.1% and 0.2% by weight of cement. The surface-treated nanofilaments were functionalized in a solution of sulfuric acid (H2SO4) and nitric acid (HNO3). The nanofilaments were dispersed by using an ultrasonic mixer and were then cast into molds. Each specimen was tested in a custom-made three-point flexural test fixture to record the mechanical properties (i.e., the Young’s modulus, flexural strength, ductility, and modulus of toughness) at the age of 7, 14, and 28 days. The microstructure was analyzed by using a scanning electron microscope. Untreated CNTs and CNFs were found to enhance the mechanical properties of cementitious materials, whereas the acid-treated CNTs and CNFs degraded the mechanical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Nano reinforced cement and concrete composites and new perspective from graphene oxide
Chuah, S., Pan, Z., Sanjayan, J. G., Wang, C. M., & Duan, W. H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.09.040 · Cited by 742
Incorporating graphene oxide in cement composites: A study of transport properties
Mohammed, A., Sanjayan, J. G., Duan, W. H., & Nazari, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.083 · Cited by 422
Meng, W., & Khayat, K. H. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.09.069 · Cited by 397
Zou, B., Chen, S. J., Korayem, A. H., Collins, F., Wang, C. M., & Duan, W. H. (2015) · Carbon · doi:10.1016/j.carbon.2014.12.094 · Cited by 311
Tong, T., Fan, Z., Liu, Q., Wang, S., Tan, S., & Yu, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.092 · Cited by 305
Metadata
- Authors
- Abu Al-Rub, R. K., Tyson, B. M., Yazdanbakhsh, A., & Grasley, Z.
- Venue
- Journal of Nanomechanics and Micromechanics
- Published
- 2012-03
- Volume
- 2
- Issue
- 1
- Pages
- 1-6
- ISSN
- 2153-5434 (ISSN-L)
- 2153-5477
- OpenAlex
- W1975442310
- Cited by
- 170
- References
- 0
- FWCI
- 20.34
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical Properties of Nanocomposite Cement Incorporating Surface-Treated and Untreated Carbon Nanotubes and Carbon Nanofibers. https://app.cochat.ai/papers/10.1061/(asce)nm.2153-5477.0000041
- The paper
- Abu Al-Rub, R. K., Tyson, B. M., Yazdanbakhsh, A., & Grasley, Z. (2012). Mechanical Properties of Nanocomposite Cement Incorporating Surface-Treated and Untreated Carbon Nanotubes and Carbon Nanofibers. Journal of Nanomechanics and Micromechanics. https://doi.org/10.1061/(asce)nm.2153-5477.0000041
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.