The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Hertzian stress contribution to low friction behavior of thin MoS2 coatings
Abstract
Friction coefficients were measured for bearing materials slid in dry air against sputter-deposited MoS2-coated substrates. Ball versus flat tests were performed over a wide range of initial Hertzian pressures (200–1500 MPa) by varying loads (1–50 N), elastic moduli (70–615 GPa), and ball diameters (1.6–12.7 mm). The friction coefficient μ decreased as load L increased according to μ∝ L(−0.32), in agreement with the Hertzian contact model. Regression analysis of over 600 data points for friction coefficient versus Hertzian pressure (PH), fitted to μ=(S0/PH)+α, gave mean values of the shear strength S0=24.8 MPa±0.5 and α= 0.001±0.001, with S0 in good agreement with values in the literature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Friction and Lubrication of Solids
Bowden, F. P., Tabor, D., & Palmer, F. (1951) · American Journal of Physics · doi:10.1119/1.1933017 · Cited by 5,890
Molybdenum disulfide as a lubricant: A review of the fundamental knowledge
Winer, W. O. (1967) · Wear · doi:10.1016/0043-1648(67)90187-1 · Cited by 471
One Hundred Years of Hertz Contact
Johnson, K. L. (1982) · Proceedings of the Institution of Mechanical Engineers · doi:10.1243/pime_proc_1982_196_039_02 · Cited by 439
The shear properties of Langmuir—Blodgett layers
Briscoe, B. J., & Evans, D. C. B. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0048 · Cited by 411
A review of recent advances in solid film lubrication
Spalvins, T. (1987) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.574106 · Cited by 240
Synergistic effects of metals co-sputtered with MoS2
Stupp, B. C. (1981) · Thin Solid Films · doi:10.1016/0040-6090(81)90023-7 · Cited by 220
Self-citationFleischauer, P. D. (1987) · Thin Solid Films · doi:10.1016/0040-6090(87)90375-0 · Cited by 189
The shear strength of thin lubricant films
Briscoe, B. J., Scruton, B., & Willis, F. R. (1973) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1973.0050 · Cited by 149
Ultralow friction films of MoS2 for space applications
Roberts, E. W. (1989) · Thin Solid Films · doi:10.1016/0040-6090(89)90515-4 · Cited by 110
Morphological properties of sputtered MoS2 films
Buck, V. (1983) · Wear · doi:10.1016/0043-1648(83)90073-x · Cited by 75
Cited by
Superlubricity of molybdenum disulphide
Martin, J. M., Donnet, C., Le Mogne, T., & Epicier, T. (1993) · Physical Review B · doi:10.1103/physrevb.48.10583 · Cited by 599
Super-low friction of MoS2 coatings in various environments
Donnet, C., Martin, J. M., Le Mogne, T., & Belin, M. (1996) · Tribology International · doi:10.1016/0301-679x(95)00094-k · Cited by 297
Metadata
- Authors
- Singer, I. L., Bolster, R. N., Wegand, J., Fayeulle, S., & Stupp, B. C.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 1990-09-03
- Volume
- 57
- Issue
- 10
- Pages
- 995-997
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W1973199938
- Cited by
- 256
- References
- 10
- FWCI
- 14.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hertzian stress contribution to low friction behavior of thin MoS2 coatings. https://app.cochat.ai/papers/10.1063/1.104276
- The paper
- Singer, I. L., Bolster, R. N., Wegand, J., Fayeulle, S., & Stupp, B. C. (1990). Hertzian stress contribution to low friction behavior of thin MoS2 coatings. Applied Physics Letters. https://doi.org/10.1063/1.104276
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.