The DOI matches its Crossref record.
Measurement of heat capacity by fitting the whole temperature response of a heat-pulse calorimeter
Abstract
A new method that fits the whole temperature response of a heat-pulse calorimeter for heat capacity is developed. Analyzing the thermal response of a heat-pulse calorimeter on a model that was used by the relaxation method, the authors derived some useful relations and further utilized the numeric method of the general linear least squares to determine the heat capacity of a sample. Absolute accuracy of the proposed method was verified by determining the heat capacity of a 0.249 76 g copper sample (purity 99.999%) on a self-designed and fully automated calorimetric system from 4.5 to 80 K. Comparing the result with the literature, the deviation in average was 1.2% from 4.5 to 20 K and 2.0% from 20 to 80 K. It is found that the proposed method is capable of measuring heat capacity regardless if the sample is adiabatically or nonadiabatically isolated. The size of the specimen is not critical for the application of the method and the temperature range of measurement can be expanded. It also deals with the τ2 effect. Details of the employed calorimetric system are described. Stability, inherent limitations, and further improvement of the system are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Kim, H. J., Kim, U., Kim, T. H., Kim, J., Kim, H. M., Jeon, B.-G., Lee, W.-J., Mun, H. S., Hong, K. T., Yu, J., et al. (2012) · Physical Review B · doi:10.1103/physrevb.86.165205 · Cited by 320
Demkó, L., Kézsmárki, I., Csontos, M., Bordács, S., & Mihály, G. (2010) · The European Physical Journal B · doi:10.1140/epjb/e2010-00055-0 · Cited by 7
Low Temperature Thermal Properties of Nanodiamond Ceramics
Szewczyk, D., & Ramos, M. A. (2022) · Crystals · doi:10.3390/cryst12121774 · Cited by 5
Metadata
- Authors
- Hwang, J. S., Lin, K. J., & Tien, C.
- Venue
- Review of Scientific Instruments
- Publisher
- AIP Publishing
- Published
- 1997-01-01
- Volume
- 68
- Issue
- 1
- Pages
- 94-101
- ISSN
- 0034-6748 (ISSN-L)
- 1089-7623
- OpenAlex
- W2047900559
- Cited by
- 264
- References
- 0
- FWCI
- 2.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Measurement of heat capacity by fitting the whole temperature response of a heat-pulse calorimeter. https://app.cochat.ai/papers/10.1063/1.1147722
- The paper
- Hwang, J. S., Lin, K. J., & Tien, C. (1997). Measurement of heat capacity by fitting the whole temperature response of a heat-pulse calorimeter. Review of Scientific Instruments. https://doi.org/10.1063/1.1147722
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.