The DOI matches its Crossref record.
X-ray detection using a superconducting transition-edge sensor microcalorimeter with electrothermal feedback
Abstract
We have developed a new type of x-ray detector based on a superconducting transition-edge thermometer operated near 100 mK. A superconducting quantum interference device is used to measure the current through the thermometer, and negative electrothermal feedback is used to improve the energy resolution and shorten the thermal time constant. We have used a detector mounted on a scanning electron microscope to measure the energy of titanium Kα (4.5 keV) fluorescence x rays with a resolution better than 14 eV full width at half-maximum. Using two other devices, we have measured an energy resolution for Joule heat pulses of 2.6 eV at 1 keV and 0.2 eV at 4 eV, the best reported for any calorimeter. An electrical noise equivalent power of 3×10−18 W/√Hz was also measured, suggesting the use of these detectors as infrared bolometers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A broadband superconducting detector suitable for use in large arrays
Day, P. K., LeDuc, H. G., Mazin, B. A., Vayonakis, A., & Zmuidzinas, J. (2003) · Nature · doi:10.1038/nature02037 · Cited by 1,380
Opportunities for mesoscopics in thermometry and refrigeration: Physics and applications
Giazotto, F., Heikkilä, T. T., Luukanen, A., Savin, A. M., & Pekola, J. P. (2006) · Reviews of Modern Physics · doi:10.1103/revmodphys.78.217 · Cited by 1,058
Cabrera, B., Clarke, R. M., Colling, P., Miller, A. J., Nam, S., & Romani, R. W. (1998) · Applied Physics Letters · doi:10.1063/1.121984 · Cited by 352
Terahertz detectors and focal plane arrays
Rogalski, A., & Sizov, F. (2011) · Opto-Electronics Review · doi:10.2478/s11772-011-0033-3 · Cited by 345
Superconducting detectors and mixers for millimeter and submillimeter astrophysics
Zmuidzinas, J., & Richards, P. L. (2004) · Proceedings of the IEEE · doi:10.1109/jproc.2004.833670 · Cited by 294
Impact of ionizing radiation on superconducting qubit coherence
Vepsäläinen, A. P., Karamlou, A. H., Orrell, J. L., Dogra, A. S., Loer, B., Vasconcelos, F., Kim, D. K., Melville, A. J., Niedzielski, B. M., Yoder, J. L., et al. (2020) · Nature · doi:10.1038/s41586-020-2619-8 · Cited by 230
Metadata
- Authors
- Irwin, K. D., Hilton, G. C., Wollman, D. A., & Martinis, J. M.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 1996-09-23
- Volume
- 69
- Issue
- 13
- Pages
- 1945-1947
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2050628481
- Cited by
- 229
- References
- 0
- FWCI
- 8.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.