The DOI matches its Crossref record.
Model for stress generated upon contact of neighboring islands on the surface of a substrate
Abstract
In the early stage of growth of a metal film on a substrate by the Volmer–Weber mechanism, a tensile stress in the film is observed to arise at about the point in the process when islands of deposited material begin to coalesce. The mechanism commonly proposed as the origin of this tensile stress is that the coalescing islands deform in order to form a relatively low energy grain boundary, at the expense of some surface energy by surface area reduction, and that this proceeds until a stress is generated that has magnitude sufficient to prevent further area reduction. Several models have been proposed for this process, but the inferred tensile stress estimates have been much larger than observed stress magnitudes in many cases. The purpose here is to introduce a model for the process based on the theory of contact of elastic solids with cohesion. A description of the process is developed on this premise for one-dimensional, two-dimensional, and three-dimensional states of deformation of coalescing islands. It is found that the latter case leads to an estimate of film stress generally consistent with observations. The features of the model for different dimensionalities are compared and contrasted with each other, as well as with other models which have been proposed for this process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Review Article: Stress in thin films and coatings: Current status, challenges, and prospects
Abadias, G., Chason, E., Keckes, J., Sebastiani, M., Thompson, G. B., Barthel, E., Doll, G. L., Murray, C. E., Stoessel, C. H., & Martinu, L. (2018) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.5011790 · Cited by 858
Self-citationOrigin of Compressive Residual Stress in Polycrystalline Thin Films
Chason, E., Sheldon, B. W., Freund, L. B., Floro, J. A., & Hearne, S. J. (2002) · Physical Review Letters · doi:10.1103/physrevlett.88.156103 · Cited by 483
Self-citationPhysical Origins of Intrinsic Stresses in Volmer–Weber Thin Films
Floro, J. A., Chason, E., Cammarata, R. C., & Srolovitz, D. J. (2002) · MRS Bulletin · doi:10.1557/mrs2002.15 · Cited by 311
Self-citationStress and strain in polycrystalline thin films
Janssen, G. C. A. M. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2007.03.007 · Cited by 253
Kinetic Model for Dependence of Thin Film Stress on Growth Rate, Temperature, and Microstructure
Chason, E., Shin, J. W., Hearne, S. J., & Freund, L. B. (2012) · Journal of Applied Physics · doi:10.1063/1.4704683 · Cited by 134
Self-citation
Metadata
- Authors
- Freund, L. B., & Chason, E.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2001-05-01
- Volume
- 89
- Issue
- 9
- Pages
- 4866-4873
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2069795925
- Cited by
- 206
- References
- 0
- FWCI
- 14.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Model for stress generated upon contact of neighboring islands on the surface of a substrate. https://app.cochat.ai/papers/10.1063/1.1359437
- The paper
- Freund, L. B., & Chason, E. (2001). Model for stress generated upon contact of neighboring islands on the surface of a substrate. Journal of Applied Physics. https://doi.org/10.1063/1.1359437
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.