The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Interfacial characteristics of a carbon nanotube–polystyrene composite system
Abstract
The performance of a composite material system is critically controlled by the interfacial characteristics of the reinforcement and the matrix material. Here we report a study on the interfacial characteristics of a carbon nanotube (CNT)-reinforced polystyrene (PS) composite system through molecular mechanics simulations and elasticity calculations. In the absence of atomic bonding between the reinforcement and the matrix material, it is found that the nonbond interactions consists of electrostatic and van der Waals interaction, deformation induced by these forces, as well as stress/deformation arising from mismatch in the coefficients of thermal expansion. All of these contribute to the interfacial stress transfer ability, the critical parameter controlling material performance. Results of a CNT pullout simulation suggests that the interfacial shear stress of the CNT–PS system is about 160 MPa, significantly higher than most carbon fiber reinforced polymer composite systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2001) · Topics in Applied Physics · doi:10.1007/3-540-39947-x · Cited by 1,748
Load transfer in carbon nanotube epoxy composites
Schadler, L. S., Giannaris, S. C., & Ajayan, P. M. (1998) · Applied Physics Letters · doi:10.1063/1.122911 · Cited by 1,657
Elastic Properties of Carbon Nanotubes and Nanoropes
Lu, J. P. (1997) · Physical Review Letters · doi:10.1103/physrevlett.79.1297 · Cited by 1,636
CRC Materials Science and Engineering Handbook
Shackelford, J. F., Han, Y.-H., Kim, S., & Kwon, S.-H. (2016) · CRC Press eBooks · doi:10.1201/b18971 · Cited by 1,274
Stress-induced fragmentation of multiwall carbon nanotubes in a polymer matrix
Wagner, H. D., Lourie, O., Feldman, Y., & Tenne, R. (1998) · Applied Physics Letters · doi:10.1063/1.120680 · Cited by 893
Study on poly(methyl methacrylate)/carbon nanotube composites
Jia, Z., Wang, Z., Xu, C., Liang, J., Wei, B., Wu, D., & Zhu, S. (1999) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(99)00263-4 · Cited by 629
Wallich, P. (1997) · Science · doi:10.1126/science.278.5336.197j · Cited by 29
Cited by
Tasis, D., Tagmatarchis, N., Bianco, A., & Prato, M. (2006) · Chemical Reviews · doi:10.1021/cr050569o · Cited by 4,273
Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites
Coleman, J. N., Khan, U., Blau, W. J., & Gun’ko, Y. K. (2006) · Carbon · doi:10.1016/j.carbon.2006.02.038 · Cited by 4,071
Mechanical Reinforcement of Polymers Using Carbon Nanotubes
Coleman, J. N., Khan, U., & Gun'ko, Y. K. (2006) · Advanced Materials · doi:10.1002/adma.200501851 · Cited by 1,621
A carbon nanotube strain sensor for structural health monitoring
Kang, I., Schulz, M. J., Kim, J. H., Shanov, V., & Shi, D. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/3/009 · Cited by 1,004
Block Copolymer Nanocomposites: Perspectives for Tailored Functional Materials
Bockstaller, M. R., Mickiewicz, R. A., & Thomas, E. L. (2005) · Advanced Materials · doi:10.1002/adma.200500167 · Cited by 878
Metadata
- Authors
- Liao, K., & Li, S.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2001-12-17
- Volume
- 79
- Issue
- 25
- Pages
- 4225-4227
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2011482099
- Cited by
- 513
- References
- 7
- FWCI
- 9.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.