The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Conductor microstructures by laser curing of printed gold nanoparticle ink
Abstract
The laser-based curing of printed nanoparticle ink to create microlines (resistors) of electrical resistivity approaching that of bulk gold was investigated. The present work relies on laser absorption in both the nanoparticle ink and the sintered gold layer, as well as the transport of thermal energy in the substrate and the resulting solvent vaporization and nanoparticle deposition and sintering. The morphology and electrical properties of the gold line can be controlled by modulating the spatial distribution of the laser beam intensity. Based on the understanding of the underlying physics, a process that circumvents a serious drawback on the functionality of cured gold microlines is produced. Microconductors with resistivity approaching that of bulk gold are produced, while loss of gold nanoparticles and cross sectional nonuniformities are avoided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Size effect on the melting temperature of gold particles
Buffat, P., & Borel, J.-P. (1976) · Physical Review A · doi:10.1103/physreva.13.2287 · Cited by 3,362
Ink-jet printed nanoparticle microelectromechanical systems
Fuller, S. B., Wilhelm, E. J., & Jacobson, J. M. (2002) · Journal of Microelectromechanical Systems · doi:10.1109/84.982863 · Cited by 594
Instability of Thin Polymer Films on Coated Substrates: Rupture, Dewetting, and Drop Formation
Sharma, A., & Reiter, G. (1996) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1996.0133 · Cited by 413
Self-Assembled Honeycomb Networks of Gold Nanocrystals
Stowell, C. A., & Korgel, B. A. (2001) · Nano Letters · doi:10.1021/nl015601i · Cited by 115
Cited by
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Conductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Tekin, E., Smith, P. J., & Schubert, U. S. (2008) · Soft Matter · doi:10.1039/b711984d · Cited by 807
Ko, S. H., Pan, H., Grigoropoulos, C. P., Luscombe, C. K., Fréchet, J. M. J., & Poulikakos, D. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/34/345202 · Cited by 770
Self-citationPerelaer, J., Smith, P. J., Mager, D., Soltman, D., Volkman, S. K., Subramanian, V., Korvink, J. G., & Schubert, U. S. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00264j · Cited by 736
Metadata
- Authors
- Chung, J., Ko, S., Bieri, N. R., Grigoropoulos, C. P., & Poulikakos, D.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2004-02-02
- Volume
- 84
- Issue
- 5
- Pages
- 801-803
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W1994489639
- Cited by
- 252
- References
- 4
- FWCI
- 10.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.