Investigation of the High-Energy Acceleration Mode in the Coaxial Gun
The DOI matches its Crossref record.
Abstract
The amount of deuterium gas admitted to a short center electrode (1 cm) coaxial plasma gun delineates two regions of operation, depending on whether the gas is localized near the inlet port or allowed to diffuse throughout the gun length. In the former, fast deuterium ions with energy in excess of the applied voltage (V0 = 15 kV) emerge from the gun muzzle whereas in the latter, the accelerated plasma which initially starts at the breech end reaches an axial velocity of ∼2.5 × 107 cm/sec at the muzzle end and forms a high-density plasma focus on the axis in front of the central electrode. Neutron measurements show that this dense plasma is not in contact with the electrode and is most probably stagnated by the high ambient gas pressure downstream. Particle momentum analysis of the fast ion (> V0) distribution and neutron measurements downstream of the gun suggest two accelerated groups of fast ions, (1) a group of ∼1016 particles which diverge from the gun muzzle and (2) a group of ∼1014 particles which stream primarily along the axis with a radial distribution of ∼3 cm width. Multiple probes (Bθ) show an asymmetric angular distribution of the discharge current that varies as a function of time during a given discharge. A sharp break in the total gas current is accompanied by large inductive voltages. In the high-energy mode, inductive voltages up to 7V0 have been recorded at the breech end.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Underwood, T. C., Riedel, W. M., & Cappelli, M. A. (2021) · Journal of Applied Physics · doi:10.1063/5.0051467 · Cited by 16
Metadata
- Authors
- Mather, J. W.
- Venue
- The Physics of Fluids
- Publisher
- AIP Publishing
- Published
- 1964-11-01
- Volume
- 7
- Issue
- 11
- Pages
- S28-S34
- ISSN
- 0031-9171 (ISSN-L)
- OpenAlex
- W2016537104
- Cited by
- 239
- References
- 0
- FWCI
- 1.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Investigation of the High-Energy Acceleration Mode in the Coaxial Gun. https://app.cochat.ai/papers/10.1063/1.1711086
- The paper
- Mather, J. W. (1964). Investigation of the High-Energy Acceleration Mode in the Coaxial Gun. The Physics of Fluids. https://doi.org/10.1063/1.1711086
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.